main logo

Waveshare Display Tft

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 6 ottobre 2025
Waveshare
Waveshare
Waveshare 2.4inch LCD TFT Display Module Support 65K RGB Colors, 240×320 Resolution,with SPI Interface,Embedded ILI9341 Driver,Using SPI Bus
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 2.4" LCD DISPLAY MODULE Embedded ILI9341 Driver, Using SPI Bus
  • 240×320 resolution, 65K RGB colors, clear and colorful displaying effect
  • SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
  • Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 3.5 inch Touch Screen IPS TFT LCD 320x480 Resolution Resistive Touch Control Display Perfect Viewing Angle for Any Revision of Raspberry Pi
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • 480x320 hardware resolution; Resistive touch control; Supports any revision of Raspberry Pi (directly-pluggable); High quality immersion gold surface plating
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali); Supports FBCP software driver as well, allows to config software resolution and set up dual-display
  • IPS technology, high quality and perfect displaying from very wide viewing angle;Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+)
  • Combined with the Raspberry Pi, allows you to: Take photos by touching (up to 17 camera modes); Use software keyboard (system interaction without keyboard/mouse)
  • Download resources: www.waveshare.com/wiki/3.5inch_RPi_LCD_(B)
  • 38,50 € SU AMAZON
Waveshare
Waveshare
Waveshare 7 pollici Touch Screen DSI Display 800x480 TFT LCD Schermo Monitor per Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, Pannello Tattile Capacitivo in Vetro Temperato, Fino a 5 Punti di Tocco
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • 【7" DSI Touch Screen Display】7 inch capacitive touch display for Raspberry Pi, DSI TFT LCD dispaly, 800×480, Resolution
  • 【Device Support】7 inch DSI LCD Display supports Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4*, working with CM4/3+/3 requires extra adapter board
  • 【System Support】7 inch touch screen monitor supports Raspbian, 5-points touch, driver free; Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free; Supports Retropie, driver free
  • 【Capacitive Touch Control】up to 5-points touch, depending on the operating system
  • 【Adjustable Brightness】Adjustable brightness via software, Low power consumption
  • 68,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi LCD Display Module 3.5inch 320 * 480 TFT Resistive Touch Screen Panel SPI Interface for Rapsberry Pi Model B/B+/2B/3B/3B+
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • Combined with the Raspberry Pi, allows you to:Take photos by touching (up to 17 camera modes);Use software keyboard (system interaction without keyboard/mouse)
  • Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+);High quality immersion gold surface plating
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali);Supports FBCP software driver as well, allows to config software resolution and set up dual-display
  • 480x320 hardware resolution; Resistive touch control; Supports any revision of Raspberry Pi (directly-pluggable)
  • 3.5inch RPi LCD (A) and 3.5inch RPi LCD (B) are hardware compatible with each other (uses different driver), and can be mutually substituted in most cases. (A) for low cost ver. while (B) for IPS ver. with better displaying.
  • 36,99 € SU AMAZON
Waveshare
Waveshare
4inch Arduino Display Module Resistive Touch Screen TFT LCD Shield 480x320 SPI Interface Compatible with Arduino UNO/Leonardo/UNO PLUS STM32 NUCLEO/XNUCLEO
star

86

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Resistive touch screen TFT LCD, 4inch, 480x320 resolution
  • Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO
  • Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
  • PWM backlight control, allows to adjust the backlight to a comfortable level; Micro SD slot, provides an easy way to store photos for displaying; Controlled via SPI, only a few Arduino pins are used
  • Comes with STM32 and Arduino examples, convenient for porting, download: www.waveshare.com/wiki/4inch_TFT_Touch_Shield
  • 32,65 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 RGB LCD Driver Board with 480×480 4inch TFT RGB Round Touch Display Capacitive 5-Point Touch, with 32-Bit 240MHz LX7 Dual-Core Processor, 8MB PSRAM and Flash, W-Fi & Blue-T Support
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • ✅This comes with a 4inch RGB round touch display. For more detailed part list, please refer to the Package Content image.
  • ✅Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory.
  • ✅Integrated 2.4GHz W-Fi and Blue-T LE dual-mode wire-less communication, with superior RF performance. Type-C connector, easier to use.
  • ✅Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability Onboard Lithium battery recharge manager ETA6096 and MX1.25 lithium battery header
  • ✅Castellated module allows soldering direct to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios
  • ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
  • 41,39 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 RGB LCD Driver Board with 480×480 2.8inch TFT RGB Round Display Capacitive 5-Point Touch, with 32-Bit 240MHz LX7 Dual-Core Processor, 8MB PSRAM and Flash, W-Fi & Blue-T Support
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • ✅This comes with a 2.8inch RGB round touch display. For more detailed part list, please refer to the Package Content image.
  • ✅Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory.
  • ✅Integrated 2.4GHz W-Fi and Blue-T LE dual-mode wire-less communication, with superior RF performance. Type-C connector, easier to use.
  • ✅Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability Onboard Lithium battery recharge manager ETA6096 and MX1.25 lithium battery header
  • ✅Castellated module allows soldering direct to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios
  • ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
  • 53,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi 3.5inch RPi LCD (C) Resistive Touch Screen TFT 480x320 Resolution 125MHz High-Speed SPI for All Version of Raspberry Pi Raspberry Pi 4
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • 480x320 hardware resolution;Resistive touch control;Supports any revision of Raspberry Pi (directly-pluggable)
  • 125MHz High-Speed SPI signal transmission, clear & stable display effect Drivers provided (works with your own Raspbian/Ubuntu/Kali directly)
  • Supports FBCP software driver as well, it is possible to config software resolution and dual-screen display
  • Combined with the 50Hz refresh rate Raspberry Pi, allows you to: Watch videos (multi formats like MP4) Play video games (RetroPie, take a bite)
  • Take photos by touching (up to 17 camera modes) Support software keyboard (system interaction without keyboard/mouse)
  • 33,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.8 Inch TFT Resistive Touch LCD Shield 320×240 Resolution Onboard SPI Interface Display Screen Module Compatible with Leonardo NUCLEO
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Resistive touch screen TFT LCD, 2.8 inch, 320×240 resolution
  • Standard interface compatible with development boards like : Leonardo, NUCLEO
  • Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
  • TF card slot, provides an easy way to store photos for displaying
  • Controlled via SPI, only a few pins are used
  • 22,49 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi 5inch Capacitive 5-Points Touch Display, Support 800×480 Resolution with DSI Interface Low Power Consumption
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Supports Raspbian, 5-points touch, driver free
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
  • Supports Retropie, driver free
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/CM3/3+ requires extra adapter board
  • Adjustable Brightness Via Software
  • 46,99 € SU AMAZON
display tft tft display waveshare display display tft moto tft display moto display tft 5 tft 5 display display tft touch display lcd tft display tft lcd