main logo

Waveshare Display

I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento: 17 giugno 2025
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
  • A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson serie Nano
  • Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 8.8inch IPS Side Monitor 480×1920 Resolution HDMI Display Panel HiFi Speaker No Touch 170° Viewing Angle Supports All Versions of Raspberry Pi Jetson Nano PC
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Supports Raspbian / Ubuntu / Kali / WIN10 IoT / Retropie, driver free
  • Supports all versions of Raspberry Pi
  • Jetson Nano:Supports Ubuntu
  • Supports Windows 11 / 10 / 8.1 / 8 / 7
  • HDMI cable and USB cable in the examples are NOT included.
  • 109,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 10.1inch DSI Capacitive Touch Display, 800x1280, IPS Panel, Optical Bonding Toughened Glass Panel, 10-Point Touch, for Raspberry Pi/RK3576/RK3506/ESP32-P4
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • 10.1″ DSI Capacitive Touch Display for Raspberry Pi/RK3576/RK3506/ESP32-P4
  • Thinner And More Space-Saving: Integrates The Driver Circuit Into An FPC Cable, The Total Thickness Of The LCD Is Only 10.8mm
  • IPS Display Panel: Excellent Display Performance With 178° Wide Viewing Angle
  • 10-Point Capacitive Touch: Gently Touch, And See What You Get, Enjoy Multi-Point UI Interaction Via Flexible Operation. Adapting Touch Function Via I2C Signal, Supports 10-Point Touch
  • Supports Backlight Adjustment Via Software
  • 83,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 5 inch Capacitive Touch Display + Development Board, 1024 x 600, 178° Viewing Angle, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Support WiFi, Onboard
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • A microcontroller development board with 5inch capacitive touch display, can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  • 1024x600 resolution, 65K color. 178° Viewing Angle. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation
  • Onboard voltage regulator, supports 7~36V wide range power supply. Onboard RTC chip and rechargeable battery to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
  • Onboard LED indicators for indicating the power and battery recharging status. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 55,99 € SU AMAZON
Waveshare
Waveshare
Waveshare General 2inch LCD Display Module IPS Screen 240×320 Resolution with Embedded Controller Communicating via SPI Interface Requires Minimum GPIO for Controlling
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
  • This is a general LCD display Module, IPS screen, 2inch diagonal, 240×320 resolution, with embedded controller, communicating via SPI interface.SPI interface, requires minimum GPIO for controlling.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
  • Driver: ST7789. Display color: RGB, 262K color.
  • Backlight: LED. Operating voltage: 3.3V.
  • 16,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 5inch Capacitive Touch Display Development Board 800×480 Resolution Screen with 2.4GHz WiFi and BLE 5 Support,32-bit LX7 Dual-core Processor
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • ESP32-S3-Touch-LCD-5,Integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces
  • IPS Display Panel,Excellent display performance, 178° wide viewing angle *
  • Capacitive 5-point touch, supports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interaction
  • Supports multiple peripherals, Supports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfaces
  • Support Batch Customization,Support software and hardware customization.Including hardware interface, LOGO, label, case and web page, etc.
  • 49,91 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi 5inch Capacitive 5-Points Touch Display, Support 800×480 Resolution with DSI Interface Low Power Consumption
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Supports Raspbian, 5-points touch, driver free
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
  • Supports Retropie, driver free
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/CM3/3+ requires extra adapter board
  • Adjustable Brightness Via Software
  • 46,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4.3 pollici DSI LCD Display per Raspberry Pi 4B, 800×480 IPS Schermo Monitor Capacitivo Touchscreen con Custodia, Supporta Raspbian/Ubuntu/Kali / WIN10 IoT
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 4.3inch capacitive touch display for Raspberry Pi 4B, IPS screen with protection case, 800x480 hardware resolution, wide angle, toughened glass panel
  • MIPI DSI interface, refresh rate up to 60Hz
  • Supports Raspbian, 5-points touch, driver free
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
  • Supports Retropie, driver free
  • 49,49 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Support WiFi, for Esphome/Home Assistant
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL
  • Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 BLE, with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 43,99 € SU AMAZON
waveshare display round waveshare display ink waveshare rp2040 display waveshare display dsi waveshare display esp32 waveshare esp32 display waveshare display raspberry waveshare display tft waveshare e-paper display