Waveshare Pi 5
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
16 giugno 2025
Waveshare
Waveshare Poe Hat (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet Hat Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,90 € SU AMAZON
Waveshare
Waveshare Raspberry Pi 5inch Capacitive 5-Points Touch Display, Support 800×480 Resolution with DSI Interface Low Power Consumption
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/CM3/3+ requires extra adapter board
Adjustable Brightness Via Software
46,99 € SU AMAZON
Waveshare
Waveshare Industrial Grade Metal Case (D) For Raspberry Pi 5, Larger Internal Space, Supports Installing Official Cooling Fan And Various HATs, Wall-Mount And Rail-Mount Support
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Industrial Metal Case For Raspberry Pi 5 - Rail-Mount And Wall-Mount Support, Larger Internal Space, Supports Installing Various HATs And Expansion Boards
Larger Internal Space - Specifically designed for Raspberry Pi 5, sheet metal process design, large internal capacity, compatible with Raspberry Pi 5 most module/accessories
Precise Cut-Out Design - Each Cut-Out Is Completely Aligned With The Interfaces Of Pi5, With Removable Reserved Holes. It Also Has Reserved Antenna Holes And RF Outlets To Reduce Signal Attenuation Of WiFi And BT Communication
Wall Mount & Rail-Mount Support - More Flexible For Industrial Installation And Use
Supports Installing Various HATs(Not included) - Such as PCIe TO 4G/5G M.2 USB3.2 HAT+, PCIe TO MiniPCIe GbE USB3.2 HAT+, PCIe TO Gigabit ETH USB3.2 HAT+,
15,99 € SU AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Single Board Only
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard CM5 socket and Raspberry Pi 40PIN GPIO header, suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
Onboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
46,99 € SU AMAZON
Waveshare
Waveshare Pi5 Nvme HDMI Case Compatible with Raspberry Pi 5, Comes with PCIE to M.2 Adapter Board, Aluminum Alloy Case, Multi-Functional All-in-One Mini-Computer Kit C
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Pi5 Module BOX-C, Mini-Computer Kit for Raspberry Pi 5, Supports PCIe to M.2 interface
Larger Space, Strong Expandability - Larger Internal Space, Supports Connecting To Various HATs Such As PoE HAT, Etc. Also With Space Left For Cable Management
Comes With Pi5 HDMI And Type-C Adapter - Adapting Type-C, Dual HDMI Female Ports, And Screw Terminal For Easier Connection With Peripherals, Supports Two Power Supply Connection Methods From The Front Side Or The Back Side
Reserved Airflow Vents For Efficient Heat Dissipation - Supports Installing Cooling Fan(NOT included) For Better Heat Dissipation
Dual 4K Output - Supports dual HDMI interfaces and dual 4K video output
37,99 € SU AMAZON
Waveshare
Waveshare Nano Base Board (B) For Raspberry Pi Compute Module 5, Same Size As The CM5
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
As the mini IO board of the Raspberry Pi Compute Module 5, CM5-NANO-A is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features integrated into a compact design, it is only the size of a CM5 and has interfaces including USB 3.2 Gen1, HDMI, audio, Ethernet port, etc.
Onboard default USB 3.2 Gen1 port.Type C can be used as a USB SLAVE interface to flash images.
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
USB TYPE A interface maximum power output 2A. It is forbidden to unplug and unplug any device other than USB when it is charged
27,99 € SU AMAZON
Waveshare
Waveshare NVMe PCIe To M.2 HAT+ Adapter with PoE, Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, with Cooling Fan
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SU AMAZON
Waveshare
Waveshare PoE HAT (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/At Network Standard, Power Over Ethernet HAT (G), Suitable for RPi 5 Official Case
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
✅Standard Raspberry Pi 40PIN GPIO header. PoE capability，IEEE 802.3af/at-compliant
✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
✅Onboard original IC solution for more stable PoE power performance
✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
26,99 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter Board (E) For Raspberry Pi 5, With Cooling Fan, Compatible With 2242/2230 NVMe Protocol M.2 Solid State Drive, 8Gbps Data Rate, High-Speed Reading/Writing, Pi 5 NVMe
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Compact Size PCIe to M.2 Board (E), Cooling Fan All-in-One Design, Suitable for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, Improves Working Efficiency
Matching the Size And Mounting Holes Of Pi 5, Combines A Temperature-Controlled Blower Fan With An Aluminium Heatsink to Accelerate Heat Dissipation
Based On 16PIN PCIe Interface Of Pi5. Connecting to PI5 Via 16PIN Cable
Compatible With 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Onboard Dual LED Indicators, Easy to Monitor the Working Status
21,99 € SU AMAZON
Waveshare
Waveshare Mini Base Board (B) Designed For Raspberry Pi Compute Module 5, Onboard EEPROM & Encryption Chip, Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
As the IO board of the Raspberry Pi Compute Module 5, CM5-IO-BASE-B is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features are integrated into a compact design, it is only the size of a bank card. It comes with two USB3.2 Gen1 ports and two USB2.0 ports onboard, making it convenient for users.
Type C can be used as a USB SLAVE interface to flash images. The USB ports have a total maximum power output of 2A. Onboard default 2 USB 3.2 Gen1 ports
Supports 4 screens to display different contents, adds MIPI DSI driver, regardless of whether a screen is connected, the system will default to connect, the screen will display in split-screen mode (related to the system version)
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Do not plug or unplug any device other than USB and HDMI when the device is powered on. Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
34,99 € SU AMAZON
waveshare pi
waveshare raspberry pi 5
waveshare 5
pi 5
waveshare raspberry pi
waveshare 5" dsi
waveshare 5 inch
#1 VINCITORE
