Ups Raspberry Pi 3 B+ Ups
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
6 ottobre 2025
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
44,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentatore UPS HAT, Supporto 18650 Caricabatteria Power Bank Power Management Scheda di espansione 5V per Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
UPS Plus è una nuova generazione di moduli di gestione dell'alimentazione UPS che supporta l'aggiornamento del firmware OTA e supporta l'RTC integrato.
Ci sono due chip INA219 a bordo per rilevare la tensione delle batterie e la tensione in uscita da UPS Plus a Raspberry Pi.
Compatibile con Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
La confezione include: 1 x UPS Plus per Raspberry Pi, 4 x M2.5 pilastri in rame, 4 x M2.5 viti, 4 x M2.5 stick di rame lungo, 4 x M2.5 dadi, 1 x schermo acrilico, 1 x istruzioni
Come usare, fare riferimento a wiki.52pi.com/index.php?title=EP-0136
39,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.3 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 4 8GB/4GB/2GB/3B+/3B/2B
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Function】X728 V2.3 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 V2.3 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B09Z6CC262), or N300 Case (ASIN: B07WZXPR2W), P165-A (ASIN: B089CK12C6), P165-B (ASIN: B08N617L1J)
【Other Geekworm UPS Recommended】X703 ultra-compact ups (ASIN: B09HZXDN8S); X708 UPS (ASIN: B08DJ5YZ7M)
52,89 € SU AMAZON
IBest
Ethernet/USB HUB HAT for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3x USB Ports Compatible with USB2.0/1.1
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
3x USB ports, compatible with USB2.0/1.1
1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
20,89 € SU AMAZON
Waveshare
Waveshare UPS HAT (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € SU AMAZON
DSLRKIT
DSLRKIT - Splitter Ethernet attivoPoE 5 V Micro USB per Raspberry Pi B/B+/2/3
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Questo splitter PoE deve essere collegato con interruttore POE o iniettore POE 48 V in modo che possa fornire alimentazione a un Raspberry Pi collegato o ad altre fotocamere con entrata micro USB da 5 V DC.
Questo splitter PoE è adatto anche per telecamere IP domestiche e router mobili con presa di alimentazione micro USB da 5 V
Porta di potenza in uscita: Presa di alimentazione micro USB.
13,90 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit, Acrylic Case for Raspberry Pi 5 / Raspberry Pi 4B / 3B+ / 3B / 2B and Raspberry Pi Hat Expansion Board
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
It is a universal acrylic case DIY kit to install raspberry pi hat expansion board with Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B together.
This is a Protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
Compatible with Raspberry Pi 4 Model B/ Pi 3 Model B+ / Pi3 Model B/ 2B / B+ and Pi Hat expansion board (Like X708 UPS/X728 UPS).
Packing List: 1 x Acrylic Case; 1 x Pack of Screws. (The raspberry pi or the expansion board is not included)
10,00 € SU AMAZON
Generico
UPS Scheda di continuità per Raspberry Pi,DC9-24V Ingresso 5V 3A Uscita Spegnimento Conservazione Protezione Tensione UPS (2S)
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Ingresso di alimentazione: 9~24V DC (presa di alimentazione DC 5,5*2,1mm o terminale KF128).Uscita di alimentazione: 5V DC (USB2.0 o terminale KF128), corrente massima 5V 3A.
Supercondensatore: 25F 2 serie.La corrente di carica è limitata a 1,4A e il condensatore è pieno per circa 3min.
Corrente di scarica: 5V3A (continua) quando è collegato all'alimentazione esterna, solo l'uscita del supercondensatore 5V3A (entro 10s).
Rilevamento dell'interruzione dell'alimentazione: 2,54 mm x 2p, 3V indica l'alimentazione esterna, 0V indica l'interruzione dell'alimentazione esterna
Progettato per applicazioni ad alta affidabilità, passa rapidamente alla scarica dell'ultracapacitore quando un'alimentazione esterna viene a mancare inaspettatamente. È in grado di fornire una durata di 10-60S per l'interruzione dell'alimentazione e di emettere un segnale di interruzione dell'alimentazione esterna, sufficiente per l'archiviazione dei dati in loco.
27,99 € SU AMAZON
ups raspberry pi 3 b
raspberry pi 3 b
raspberry pi 3 b+
raspberry pi 3 ups
ups raspberry pi 3
raspberry pi 3 b+ 4gb
raspberry pi 3 b+ cover
raspberry pi 3 b+ kit
raspberry pi 3 b+ 2gb
raspberry pi 3 b+ fan
#1 VINCITORE
