Touch Points

10.1-inch IPS capacitive touch screen with a hardware resolution of 1280 x 800. Adopts optical bonding technique, clearer imaging
Support 10-point capacitive touch control, tempered glass touch panel with 6H hardness
Can be directly connected to the LCD by the DSI interface of the Raspberry Pi, and its refreshing rate is up to 60Hz
When working with Pi, we provide the Pi OS system driver
Support Raspberry Pi 4B/3B+/3A+, but CM3+/4 should work with Extra DSI cable. Support backlight adjusted by software
119,99 € SU AMAZON

Compatible models -> Raspberry Pi 5 / 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ (Zero W / Zero needs USB and HDMI adapters, which are not included in this product) run Raspberry Pi OS / Ubuntu, NVIDIA Jetson Nano Developer Kit / 2GB Developer Kit run Jetson Linux, computers with an HDMI output port run Windows 11 / 10 / 8 / 7. (Note: Raspberry Pi requires manual configuration of resolution, other devices usually adjust automatically.)
Screen parameters -> 7 inch, 1024 x 600 pixel, IPS wide viewing angle, 5-point touch capacitive screen, HDMI input. (Note: This monitor does NOT have a shell.)
Multi touch -> Support up to five-point touch. (Only certain systems and software support multi-touch.)
Two modes -> Standing mode (installed 2 stands) and laying mode (installed 4 brass standoffs).
Get support -> Our technical support team is always ready to answer your questions.
66,95 € SU AMAZON

Specifically for Raspberry Pi: Only need the connection to the display port (marked CAM/DISP on Raspberry Pi 5, DISPLAY on 4 and previous)
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ (No HDMI, not compatible with any other device)
Compatible Systems: Raspberry Pi OS (multi-touch available) / Ubuntu (single touch only)
Screen Parameters: 7 inch, 800x480 pixel, IPS type wide viewing angle, 5-point touch capacitive screen
Easy to Use: No configuration is required (for new and configuration-unchanged systems)
53,95 € SU AMAZON