main logo

Raspberry Sim

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 6 ottobre 2025
Waveshare
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
  • Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
  • Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
  • 30,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 77,99 € SU AMAZON
Waveshare
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • ✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
  • ✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
  • ✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
  • ✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
  • ✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
  • 50,99 € SU AMAZON
Waveshare
Waveshare
Raspberry Pi GSM/GPRS/Bluetooth HAT Based SIM800C Support SMS, GPRS, DTMF, HTTP, FTP, MMS, email for Band GSM 850/EGSM 900/DCS Compatible All Version of Pi/Jetson Nano
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nanos; Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc
  • Bluetooth 3.0, supports data transferring through Bluetooth;UART interface, for connecting host control boards like Arduino/STM32;Baudrate auto detection (1200bps ~115200bps)
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper;2x LEDs for indicating the module working status;SIM card slot for 1.8V/3V SIM card
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),wiki link: www.waveshare.com/wiki/SIM800C_GSM/GPRS_HAT
  • 27,65 € SU AMAZON
Waveshare
Waveshare
Waveshare NB-IoT Hat for Raspberry Pi and Jetson Nano Based on SIM7020E B1/B3/B5/B8/B20/B28 Bands for Europe Asia Africa Australia for Intelligent Instruments Asset Tracking Remote Monitoring..
Spedizione gratuita
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • SIM7020E è applicabile principalmente in Europa, Asia, Africa e Australia. Interfaccia USB integrata, per alimentazione o debug. Pin di controllo UART, per connettersi a schede host come Arduino/STM32. Si prega di controllare i nastri supportati in base al fornitore di servizi locale al momento dell'ordine.
  • Intestazione di estensione GPIO 40PIN standard per Raspberry Pi, compatibile con schede serie Raspberry Pi, Jetson Nano. Fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32/Python) Supporta protocolli di comunicazione come LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, ecc.
  • Supporta protocolli di comunicazione come LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS ecc; Interfaccia USB integrata, per l'alimentazione o il debug dei pin di controllo Breakout UART, per il collegamento a schede host come Arduino/STM32
  • Il traduttore di tensione integrato, 3,3 V per impostazione predefinita, consente di passare a 5 V tramite un ponticello incorporato; slot per scheda SIM, supporta uno slot per schede SIM specifico NB-IoT, supporta una specifica scheda NB-IoT
  • 2 indicatori LED, facili da monitorare lo stato di funzionamento. Velocità di trasmissione: 300 bps~921600 bit/s (predefinito 115200 bit). Controllo tramite comandi AT (comandi V.25TER, 3GPP TS 27.007 e SIMCOM AT) Bundle di baud: 300 bit/s ~ 921600 bit/s (115200 bit/s predefinito) Controllo tramite comandi AT (comandi V.25TER, 3GPP TS 27.007 e SIMCOM ATM )
  • 28,99 € SU AMAZON
Coolwell
Coolwell
Coolwell SIM7028 NB-IoT HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W for Arduino Jetson Nano Supports Global Band NB-IoT Communication with GSM Antenna
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • NB-IoT HAT for Raspberry Pi, teste di prolunga standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi e Jetson Nano, ecc.
  • NB-IoT HAT for Jetson Nano, supporta TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS/SSL, ecc.; supporto per applicazioni SIM: SAT Class 3, GSM 11.11, USAT
  • NB-IoT HAT for Arduino, interfaccia di tipo C per il debug del software; pin di controllo UART Onboard, per il collegamento con schede host come Ardui/STM32
  • Da USB a chip UART, il pin di comunicazione UART può essere configurato tramite jumper; slot per scheda SIM nano integrata, compatibile con schede specifiche NB-IoT
  • Con risorse di sviluppo online e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/ESP32)
  • 23,99 € SU AMAZON
KALEA-INFORMATIQUE
KALEA-INFORMATIQUE
KALEA-INFORMATIQUE Cappello 3G 4G LTE per Raspberry Pi, Samsung ARTIK, Latte Panda o ASUS Tinker. per moduli MiniPCIe, con slot Nano SIM.
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Slot Mini PCIe plug-in, compatibile con le schede di copertura LTE, UMTS/HSPA+ e GSM/GPRS/EDGE. Slot NANO SIM.
  • Può essere utilizzato con un PC tramite una connessione Micro USB o con un Raspberry. Alimentazione 3A. Dimensioni: 85 X 55 X 25 mm. Compatibile con i modelli Raspberry Pi con connettore GPIO a 40 pin (4, 3, 2, B+).
  • Compatibile con i moduli Mini PCIe dei seguenti produttori: Quad: EC25 / EC21 / EC20 / UC20 / LTE-EP06 Sierra: serie AirPrime MC Telit: LM960, LE910V2, HE910, LE910Cx Huawei: ME909s-120, ME909s-821, ecc. Simcom: SIM7100, SIM7230, ecc. ZTE: ZM8620, ecc. U-Blox: serie MPCI-L2 Thales: PLS62W, mPLS8, mPLAS9
  • Compatibile con schede madri come: Raspberry Pi 4, 3, 2, B+ ASUS Tinker Board Rock 64 Samsung ARTIK Latte Panda
  • Inclusi nella confezione: 1 X modulo 3G/4G/LTE 1 X cavo USB/MicroUSB 1 X cacciavite 8 X viti e dadi
  • 26,90 € SU AMAZON
Raspberry Pi
Raspberry Pi
Raspberry Pi 4 Modello B (4GB)                  
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • SDRAM LPDDR4-3200 da 1 GB, 2 GB, 4 GB o 8 GB (a seconda del modello)
  • 2,4 GHz e 5,0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet
  • 2 porte USB 3.0; 2 porte USB 2.0.
  • Intestazione GPIO standard a 40 pin Raspberry Pi (completamente compatibile con le schede precedenti)
  • 67,69 € SU AMAZON
Waveshare
Waveshare
Raspberry Pi NB-IoT/eMTC/EDGE/GPRS/GNSS HAT Module Based SIM7000E Support TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail,GNSS Position for Pi Zero/Zero W/Zero WH/2B/3B/3B+
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
  • Download resources: www.waveshare.com/wiki/SIM7000E_NB-IoT_HAT
  • 43,90 € SU AMAZON
Waveshare
Waveshare
SIM7000G NB-IoT/Cat-M/EDGE/GPRS HAT For Raspberry Pi Series, Low Power Narrow Band Cellular IoT Communication Module,GNSS Positioning, Support Global Band
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.; Supports GNSS positioning (GPS, BeiDou, GLONASS)
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Breakout UART control pins, to connect with host boards like Ardui/STM32
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
  • Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
  • 43,95 € SU AMAZON
raspberry pi sim raspberry sim module raspberry sim 4g modulo sim raspberry raspberry pi sim module