Raspberry Pi Kvm Hat
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
7 ottobre 2025
Geekworm
Geekworm KVM-A3 Kit for Raspberry Pi 4 Open Source KVM Over IP (Only Support V3 OS)
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【What is it】This is a kit provides a KVM Over IP solution based on Raspberry Pi 4
【Compatiblity】Only compatible with Raspberry Pi 4.
【Function】Remotely turn on/ turn off / restart your computer; configure configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc
【How to Power】Power via USB-C port of X630-A3; Recommend 5V 4A 20W PSU: ASIN B09J4V3RYK
【How to Cool】X630-A3 comes with a cooling fan to cool the raspberry pi, also supports 7mm heatsink on raspberry pi
【What Included】X630 HDMI to CSI-2 Board (for video capture), X630-A3 HAT Board (for ethernet, cooling, RTC, power in etc), X630-A5 Adapter Board (it is installed inside the PC case, connecting the computer motherboard and IO panel cabe of PC case), 0.96 inch OLED (for display, Resolution: 128×64 pixel), Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
【Extra Needed】Raspberry Pi 4, TF Card, HDMI Cable, Power Adapter
85,90 € SU AMAZON
IBest
Ethernet/USB HUB HAT for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3x USB Ports Compatible with USB2.0/1.1
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
3x USB ports, compatible with USB2.0/1.1
1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
20,89 € SU AMAZON
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
✅4x extended USB ports, compatible with USB 2.0 / 1.1
✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
16,15 € SU AMAZON
DSLRKIT
DSLRKIT Power Over Ethernet Poe Hat IEEE802.3af DC 5V 2.5A with 1.5KV Isolation for Raspberry Pi 4 4B 3B+ 3B Plus
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE Switch; Support 48V~57V Passive Power Over Ethernet PoE injector
Maximum.12Watt DC5V 2.5A
With 1.5KV isolation
Compatible unsolicited Passive PoE switch
11,90 € SU AMAZON
Geekworm
Geekworm KVM-A8 PCIe Version for Raspberry Pi 4 Model B KVM over IP (NOT including Raspberry Pi 4)
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【What is it】This is a kit providing a KVM over IP solution for Raspberry Pi 4 8GB/4GB/2GB, which can control a computer using a web browser!
【Compatibility】for use with Raspberry Pi 4 Model B 8GB / 4GB / 2GB / 1GB only (not support RPi 3)
【Function】remotely turn on/turn off/restart your computer; configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc.
【How to Power】POE Power (recommended), or DC 5V3A PSU power via USB-C port of X630-A8 (Refer to ASIN B09J4V3RYK)
【How to Cool】X630-A8 comes with an active cooling fan to cool the raspberry pi
【What included】1 x X630 HDMI to CSI-2 modules, 1 x X630-A8 expansion board and other accessories, refer to the packing list picture for details
【Extra needed (not included)】Raspberry Pi 4, TF card, power adapter (only requires it if no POE power)
100,89 € SU AMAZON
Raspberry Pi
M.2 HAT+ pour Raspberry Pi 5
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
W128907668
15,49 € SU AMAZON
Waveshare
Waveshare PoE HAT (C) For Raspberry Pi 3B+/4B, 802.3af/at Power-Sourcing Equipment Required
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory(with Standard Pi 40PIN GPIO Header) for the Raspberry Pi 3B+/4B
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Pi in only one Ethernet cable. Fully isolated switched-mode power supply (SMPS)
While providing stable power for Raspberry Pi, there's also a USB-A port for powering extra external device
Onboard high speed active cooling fan, better heat dissipation
24,99 € SU AMAZON
Waveshare
Waveshare HUB HAT per Raspberry Pi 4 con 4 Porte USB 3.2 Gen1 - Velocità Dati Fino a 5 Gbps - Plug and Play Senza Driver - Scheda di Espansione USB
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
4x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1,Onboard external USB-C 5V DC power port, ensures more stable power supply
1x power indicator and 4x USB port indicators, easy to check the operating status
Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well,Comes with development resources and manual
26,99 € SU AMAZON
ZDE
ZDE ZP580 PoE+ HAT for Raspberry Pi 5 Power Over Ethernet HAT Adapter Board Supports 802.3af/at Network Standard with Onboard Cooling Fan
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
The PoE+ HAT expansion board is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs and peripherals.
Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at networking standard. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Equipped with an onboard active cooling fan for better heatsink and more stable operation performance. If you don’t need to use the active cooler, you can also disassemble it.
Comes with onboard 5V & 12V header outputs. 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
Onboard buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
Suitable for use with aluminum case kit. For aluminum enclosure, please refer to model ZC501(ASIN: B0DSZYLMSS).
24,99 € SU AMAZON
raspberry pi kvm
hat raspberry pi
raspberry pi hat
hat raspberry pi 5
raspberry pi dac hat
raspberry pi hat adc
raspberry pi 4 kvm
raspberry pi hat ssd
raspberry pi lora hat
raspberry pi ups hat
#1 VINCITORE
