Raspberry Pi Cm5 Io Board
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
17 giugno 2025
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Single Board Only
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Standard CM5 socket and Raspberry Pi 40PIN GPIO header, suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
Onboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
46,99 € SU AMAZON
Geekworm
Geekworm X1501 CM5 IO Carrier Board for Raspberry Pi Compute Module 5 Support Dual M.2 NVMe SSD|1GbE+2.5GbE Ethernet porte
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Compatibilità: X1501 è compatibile con Raspberry Pi Compute Module 5 CM5 e tutte le varianti CM5
Funzione: supporta Dual M.2 NVMe SSD, con due porte Ethernet 1GbE e 2.5 GbE, porte USB 2.0 + USB3.0, due porte Hdmi 2.0, connettori Dual MIPI DSI/CSI-2, RTC, PWM Fan connector e pulsante di alimentazione conveniente
Modalità di alimentazione: 5,1 Vdc +/-5% 5 A di alimentazione tramite porta USB-C di X1501; si prega di utilizzare l'alimentazione di alimentazione per fornire 5,1 V a 5 A di uscita, alimentazione incompatibile con una tensione di uscita inferiore potrebbe non funzionare sul sistema
Packing List: 1 X X1501 CM5 IO Carrier Board 1 X X1500-C1 Metal Case, 1 X C519 Heatsink, 1 X Screws Pack Accessories
Matching Metal Case (Not included): Case for Raspberry Pi CM5 and X1501 IO board, refer to X1500-C1 case (ASIN: )
69,00 € SU AMAZON
Waveshare
Waveshare CM5 IO Board Metal Case, Compatible with Raspberry Pi Official Compute Module 5 IO Board, Comes with Cooling Fan
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi official Compute Module 5 IO Board; Mini computer chassis, robust and nice looking
Make it easy to build your own Raspberry Pi CM5 mini PC
the standard 40PIN GPIO header is still available, making it easy to connect sorts of HATs
Each cut-out is completely aligned with the connector; Comes with cooling fan, combined with the airflow vent, better heat dissipation
Wall mount holes on two sides, handy for mounting. Binocular Vision, PoE Powered Raspberry Pi Projects, Or Other Industrial Context
26,99 € SU AMAZON
Waveshare
Waveshare CM5 Mini Base Board (A) Compatible with Raspberry Pi Compute Module 5 Lite/eMMC Series, Suitable for Evaluating The Raspberry Pi CM5 or Being Integrated into End Products
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard CM5 socket and color-coded Raspberry Pi 40PIN GPIO header; Suitable for Compute Module 5 Lite/eMMC series module
Onboard multiple connectors, more convenient to use
Gigabit Ethernet RJ45 connector; 16PIN PCIe (PCIe Gen2/3 x1); USB 3.2 Gen1 Type A × 2, USB 2.0 via 6PIN 1mm FFC connector × 2; 5V, 4PIN JST-SH PWM connector; DC 5V 5A power input
4-lane MIPI interface × 2 (22pin 0.5mm FFC connector); HDMI port × 2 (including one port via FFC connector), supports dual 4K outputs; TF card slot for Compute Module 5 Lite (without eMMC) variants;
Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
32,99 € SU AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Bundle with PoE Base Board + Case + Power Supply Adapter
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Standard CM5 socket and Raspberry Pi 40PIN GPIO header suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
ONboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
69,99 € SU AMAZON
LUCKFOX
LUCKFOX CM5 IO Board - for Raspberry Pi Compute Module 5 Expansion Board with Dual HDMI, USB3.0, PoE Gigabit Ethernet Port, M.2 NVMe Solid State Drive Booting
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi CM5 - Suitable for all Compute Module 5 variants and can be used as a development board or integrated directly into end products.
High-speed storage expansion - Supports M.2 NVMe Solid State Drive (NVMe protocol only), with read/write speeds far exceeding those of micro TF cards, and supports booting from NVMe Solid State Drive.
Rich Interface Configuration - Provides dual HDMI outputs, dual USB 3.0 ports, and PoE Gigabit Ethernet port (RJ45) to meet multi-scenario connectivity needs.
Flexible compatibility - Supports 2280/2260/2242/2230 M.2 SSDs in four sizes to fit different storage scenarios.
Convenient Integration Design - Main interfaces are centrally and unilaterally arranged, simplifying the installation of the enclosure, compatible with HATs and PCIe modules, and quick to build a prototype system.
24,99 € SU AMAZON
Waveshare
Mini Scheda di Base per Raspberry Pi Compute Module 5 Lite/eMMC, CM5 Mini IO Scheda con CM5 Socket/40PIN GPIO Header/RJ45 Gigabit Eth/16PIN PCIe/HDMI/USB 3.2/USB 2.0 Interfaccia ecc.
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Mini Base Board for Raspberry Pi Compute Module 5 Lite/eMMC series module, with onboard CM5 socket, Gigabit Ethernet RJ45 connector, 40PIN GPIO header, 16PIN PCIe, USB 3.2 Gen1 Type A × 2, USB 2.0 via 6PIN 1mm FFC connector × 2, 4-lane MIPI interface × 2 , HDMI port × 2, RTC etc.
Do not plug or unplug any device other than USB and HDMI when the device is powered on. When you need to use POE, connect the POE jumper cap to the EN position
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Type C can be used as a USB SLAVE interface to flash images. Do not connect other devices when using Type C to flash. Insufficient power supply for flashing will cause the device to be unrecognized. Onboard default 2 USB 3.2 Gen1 ports. The USB ports have a total maximum power output of 2A
Supports 4 screens to display different contents, adds MIPI DSI driver, regardless of whether a screen is connected, the system will default to connect, the screen will display in split-screen mode (related to the system version)
31,67 € SU AMAZON
Waveshare
Waveshare Mini Base Board (B) Designed For Raspberry Pi Compute Module 5, Onboard EEPROM & Encryption Chip, Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
As the IO board of the Raspberry Pi Compute Module 5, CM5-IO-BASE-B is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features are integrated into a compact design, it is only the size of a bank card. It comes with two USB3.2 Gen1 ports and two USB2.0 ports onboard, making it convenient for users.
Type C can be used as a USB SLAVE interface to flash images. The USB ports have a total maximum power output of 2A. Onboard default 2 USB 3.2 Gen1 ports
Supports 4 screens to display different contents, adds MIPI DSI driver, regardless of whether a screen is connected, the system will default to connect, the screen will display in split-screen mode (related to the system version)
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Do not plug or unplug any device other than USB and HDMI when the device is powered on. Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
34,99 € SU AMAZON
Geekworm
Geekworm X1500 CM5 IO Carrier Board for Raspberry Pi Compute Module 5 Support Dual M.2 NVMe SSD|1GbE Ethernet Port
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Compatibilità: X1500 è compatibile con Raspberry Pi Compute Module 5 CM5 e tutte le varianti CM5
Funzione: supporto SSD Dual M.2 NVMe, con porte Ethernet 1 GbE, porte dual USB 3.0, due porte Hdmi 2.0, connettori Dual MIPI DSI/CSI-2, RTC, PWM Fan connector e comodo pulsante di alimentazione
Modalità di alimentazione: 5,1 Vdc +/-5% 5 A di alimentazione tramite porta USB-C di X1500; si prega di utilizzare l'alimentazione in grado di fornire 5,1 V a 5 A di uscita, alimentazione incompatibile con una tensione di uscita inferiore potrebbe non funzionare sul sistema
Packing List: 1 x X1500 CM5 IO Carrier Board 1 x Screws Pack Accessories
Matching Metal Case (Not included): Case for Raspberry Pi CM5 and X1500 IO board, refer to X1500-C1 case (ASIN: )
59,00 € SU AMAZON
Waveshare
Mini Base Scheda per Raspberry Pi CM5 Lite/eMMC, Compute Module 5 Mini IO Scheda con Gigabit Eth/40PIN GPIO/M.2 M KEY/USB 3.2/USB 2.0/HDMI Interface ecc. a Bordo EEPROM e Chip di Crittografia
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Mini IO Base Board for Raspberry Pi Compute Module 5 Lite/eMMC series module, dimensions: 85 × 56mm, with onboard CM5 socket suitable for all variants of Compute Module 5, color-coded Pi 40PIN GPIO header for connecting various HAT / HAT+ modules, M.2 M KEY supports 2230/2242 NVMe Solid State Drives and booting Pi5 from solid state drive
Onboard RJ45 Gigabit Ethernet port supports 10M / 100M / 1000M network access, 2x USB 3.2 Gen1 high-speed ports, supports 5Gbps synchronous operation, 2x USB 2.0 FFC connector, can be connected through an adapter
Onboard 2x MIPI interfaces for connecting DSI displays and CSI cameras, 2x HDMI port, HDMI0 connector supports 4K output, HDMI1 FFC connector, supports 4K output, can be connected through an adapter
Onboard TF card slot for connecting a TF card with pre-burnt image (Lite variant ONLY) , PWM Fan header for connecting cooling fan, 5V power supply
Onboard EEPROM and encryption chip, provides fast and secure symmetric authentication
33,59 € SU AMAZON
raspberry io board
raspberry pi io
raspberry pi cm5
cm5 io board
raspberry pi board
raspberry pi compute module 5 io board
raspberry pi compute module 4 io board
raspberry pi expansion board
#1 VINCITORE
