Raspberry Pi 5 Ssd Adapter
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
17 giugno 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter Board (E) For Raspberry Pi 5, With Cooling Fan, Compatible With 2242/2230 NVMe Protocol M.2 Solid State Drive, 8Gbps Data Rate, High-Speed Reading/Writing, Pi 5 NVMe
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Compact Size PCIe to M.2 Board (E), Cooling Fan All-in-One Design, Suitable for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, Improves Working Efficiency
Matching the Size And Mounting Holes Of Pi 5, Combines A Temperature-Controlled Blower Fan With An Aluminium Heatsink to Accelerate Heat Dissipation
Based On 16PIN PCIe Interface Of Pi5. Connecting to PI5 Via 16PIN Cable
Compatible With 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Onboard Dual LED Indicators, Easy to Monitor the Working Status
21,99 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € SU AMAZON
GeeekPi
GeeekPi N10 Tiny NVMe SSD Adapter Board for Raspberry Pi 5
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】The adapter board is compatible with Raspberry Pi 5 & M2 NVMe SSD 2230/2242 for fast M.2 NVME storage, leveraging its advanced features and connectivity options to deliver enhanced storage performance; it is fully compatible with Raspberry Pi OS, ensuring seamless integration and reliable operation without without in the Raspberry Pi epoca Cosystem.
【Installazione plug-and-play】Progettato per semplicità e convenienza, la scheda adattatore offre funzionalità plug-and-play, consente agli utenti di installare rapidamente e configurare NVMe SSD storage senza bisogno di procedure complesse.
【M-key Slot Compatibility】The adapter board is designed to accommodate M.2 NVMe SSDs with M-key slots, ensuring a secure and stable connecection between the SSD and the Raspberry Pi 5.
Supporto a forma di fattore: il supporto per tavolo misura sia i fattori di forma 2242 e 2230, referring to the dimensions of the SSD. Questo significa che può accogliere SSD che sono lunghi 22 mm e lunghi 40 mm (2242) o 22 mm larghi e 30 mm lunghi (2230).
【High Speed Connectivity】Equipped with PCIe Gen3 x4 interface, the adapter board ensures efficient data transfer between the NVMe SSD and the Raspberry Pi 5, delivering rapid access to stored data and improving overall system performance.
【Wiki】https://wiki.52pi.com/index.php?title=EP-0229
14,99 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
27,99 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,00 € SU AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
35,00 € SU AMAZON
KEYESTUDIO
KEYESTUDIO Raspberry Pi 5PCIE-M.2NVME SSD Shield
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it：New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Toturiali link-https://bit.ly/4eSOPE7
14,32 € SU AMAZON
raspberry pi 5 ssd
raspberry pi 5 ssd sata adapter
ssd raspberry pi 5
raspberry pi 5 8gb ssd
kit ssd raspberry pi 5
raspberry pi 5 kit ssd
raspberry pi 5 ssd kit
raspberry pi 5 ssd shield
raspberry pi 4 ssd adapter
ssd per raspberry pi 5
#1 VINCITORE
