Raspberry Pi 4 Ups Hat
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
6 ottobre 2025
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
44,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentatore UPS HAT, Supporto 18650 Caricabatteria Power Bank Power Management Scheda di espansione 5V per Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
UPS Plus è una nuova generazione di moduli di gestione dell'alimentazione UPS che supporta l'aggiornamento del firmware OTA e supporta l'RTC integrato.
Ci sono due chip INA219 a bordo per rilevare la tensione delle batterie e la tensione in uscita da UPS Plus a Raspberry Pi.
Compatibile con Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
La confezione include: 1 x UPS Plus per Raspberry Pi, 4 x M2.5 pilastri in rame, 4 x M2.5 viti, 4 x M2.5 stick di rame lungo, 4 x M2.5 dadi, 1 x schermo acrilico, 1 x istruzioni
Come usare, fare riferimento a wiki.52pi.com/index.php?title=EP-0136
39,99 € SU AMAZON
IBest
Ethernet/USB HUB HAT for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3x USB Ports Compatible with USB2.0/1.1
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
3x USB ports, compatible with USB2.0/1.1
1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
20,89 € SU AMAZON
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
33,95 € SU AMAZON
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.3 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 4 8GB/4GB/2GB/3B+/3B/2B
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Function】X728 V2.3 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 V2.3 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B09Z6CC262), or N300 Case (ASIN: B07WZXPR2W), P165-A (ASIN: B089CK12C6), P165-B (ASIN: B08N617L1J)
【Other Geekworm UPS Recommended】X703 ultra-compact ups (ASIN: B09HZXDN8S); X708 UPS (ASIN: B08DJ5YZ7M)
52,89 € SU AMAZON
iiunius
UPS HAT (E) per Raspberry Pi 5/4B/3B+ Type-C Bi-Directional Fast Charging 5V 6A Output Pogo Pins Connector Supports 4× 21700 Li Batterie (NOT Included)
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Connettore Pogo pin: adotta il design del connettore del pogo, compatibile con Raspberry Pi 5/4B/3B+
Ricarica rapida bidirezionale: porta integrata di tipo C con ricarica rapida bidirezionale, supporta più ingressi di carica/protocolli di uscita come PD3.0, fino a 40 W di ricarica. Batteria a bordo IC per la lettura della tensione della batteria, corrente, potenza, capacità di ripresa e altri parametri
Comunicazione bus I2C: supporta la comunicazione bus I2C per monitorare lo stato operativo della porta di tipo C e delle batterie in tempo reale supporta 4 batterie 21700 Li (non incluse), maggiore capacità e durata della batteria
Chip buck ad alta potenza: chip buck integrato ad alta potenza per uscita stabile da 5 V 6 A. Supporta il display del livello della batteria sul sistema, facile da controllare lo stato operativo del HAT con risorse di sviluppo online e manuale (lingua italiana non garantita)
45,11 € SU AMAZON
Waveshare
Waveshare HUB HAT per Raspberry Pi 4 con 4 Porte USB 3.2 Gen1 - Velocità Dati Fino a 5 Gbps - Plug and Play Senza Driver - Scheda di Espansione USB
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
4x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1,Onboard external USB-C 5V DC power port, ensures more stable power supply
1x power indicator and 4x USB port indicators, easy to check the operating status
Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well,Comes with development resources and manual
26,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Case in Alluminio con Ventola e Dissipatore - Supporta POE Hat - per Modello B
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Increased Height Case】This case is higher than normal cases. It is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, and also supports POE Hat. For Case with ICE Tower Cooler kit, ASIN: B0CC1DGR99
【Easy Access to all Ports】GeeekPi Raspberry Pi 4 Case can accurately access power port, micro HDMI ports, audio port, usb ports, Gigabit Ethernet port, sd card slot.
【Good Cooling Effect】With 40mm quiet cooling fan and aluminum heatsinks provide Raspberry Pi 4 with a good cooling effect.
【High Quality Aluminum Material】GeeekPi Raspberry Pi 4 Case is made of high quality aluminum alloy; Sturdy and durable; Keep your Pi 4 Board free from dust, scratches and damage.
【Good Reception of Signals】With acrylic top panel, it won't block Wifi or Bluetooth signal.
【NOTE】This case is only for GeeekPi POE Hats ( B08MPZD47R and B08CVDQWXF ) and Raspberry Pi Official POE+ HAT.
【WiKi】wiki.52pi.com/index.php?title=ZP-0153
15,99 € SU AMAZON
hat raspberry pi 4
raspberry pi 4 hat
raspberry pi ups hat
ups hat raspberry pi
raspberry pi 4 ups
ups raspberry pi 4
raspberry pi 4 dac hat
raspberry pi 4 usb hat
raspberry pi 4 ssd hat
ssd hat raspberry pi 4
#1 VINCITORE
