Raspberry Pi 4 Nvme Adapter
I 10 migliori prodotti di novembre 2025
Ultimo aggiornamento:
30 novembre 2025
GeeekPi
GeeekPi M.2 NVME SSD Adapter Board for Raspberry Pi 4 Model B 1GB /2GB /4GB /8GB
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Ampia capacità di archiviazione】La scheda adattatore consente di collegare SSD NVMe M.2 al Raspberry Pi, offrendo un aumento significativo della capacità di archiviazione. Ciò consente di archiviare e accedere a grandi quantità di dati, rendendolo ideale per progetti e applicazioni ad alta intensità di dati.
【Trasferimento dati ultra veloce】 Sfruttando la tecnologia NVMe, la scheda adattatore facilita il trasferimento dati ad alta velocità tra Raspberry Pi e SSD collegato. Ciò garantisce tempi di caricamento rapidi, funzionamento fluido e prestazioni complessive migliorate per i tuoi progetti Raspberry Pi.
【Facile installazione e compatibilità】La scheda adattatore è progettata per una facile installazione, collegandosi al Raspberry Pi tramite pin pogo senza necessità di cavi o saldature complesse. È anche compatibile con vari modelli di Raspberry Pi, offrendo flessibilità e praticità per diversi progetti.
【Fattore di forma compatto】Con il suo design compatto, la scheda adattatore si integra perfettamente con il tuo Raspberry Pi senza aggiungere volume inutile. Ciò è particolarmente importante per i progetti in cui lo spazio è limitato, garantendo un uso efficiente dell'impronta del Raspberry Pi.
【Versatilità e scalabilità futura】La scheda adattatore SSD M.2 NVMe amplia la gamma di applicazioni e progetti che puoi intraprendere con il tuo Raspberry Pi. Sia che tu stia costruendo un centro multimediale, una soluzione di storage di rete o un gateway IoT ad alte prestazioni, la scheda adattatore offre scalabilità, consentendo aggiornamenti o sostituzioni semplici degli SSD man mano che le tue esigenze sono in evoluzione.
【Wiki】https://wiki.52pi.com/index.php?title=EP-0171
41,57 € SU AMAZON
Waveshare
Waveshare PCIe TO M.2 Adapter (B), Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, for Raspberry Pi CM4, Extending M.2 Interface For Compute Module 4 Series IO Boards
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
PCIe To M.2 Adapter (B), Adapter For NVMe Protocol M.2 Solid State Drive, Compatible With Different Sizes Of M.2 Solid State Drive
Faster Reading/Writing Speed Than HDD, Greatly Boosting Drive Performance
Extending M.2 Interface For Raspberry Pi Compute Module 4 Series IO Boards. Working With CM4 IoT Industrial Control Base
Onboard Operating Indicator. The LED Lights Up When Power-On, And Keeps Blinking While Reading/Writing
11,99 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,00 € SU AMAZON
GeeekPi
GeeekPi N07 M.2 PCIe a NVMe Bottom SSD Pip Periferica di Sostituzione per Raspberry Pi 5, Supporta M.2 Key-M NVMe 2230/2242/2260/2280 (SSD e Pi5 non inclusi)
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】GeeekPi N07 PCIe M.2 M-key NVMe SSD Pip Peripheral Board Bottom is only compatible with Raspberry Pi 5 8GB 4GB board. Nota: Raspberry Pi 5 board is not included.
【Supporto M.2 NVMe SSD】Raspberry Pi 5 N07 M.2 NVMe SSD Adapter Board is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280.
【How to Power】Use 5 Vdc +/-5%, 5 A to power via Raspberry Pi 5 and Pi 5 will power N07 tramite pin pogo per extra power during large data transfer. and the data will transfer via FFC ribben cable with Raspberry Pi 5 via PCIe slot, consiglia di utilizzare GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
【Cooling Solution】Ventilazione hole design fornisce un'eccellente ventilazione dell'aria per il raffreddamento e supporto per Raspberry Pi 5 Active Cooler installazione.
Pacchetto incluso: 1 x N07 M.2 2280 PCIe to NVMe Bottom; 1 x cavo personalizzato PCIe FFC, 4 x M2,5 x 6 mm Copper pillar; 4 x M2,5 x 12+4 mm lungo Copper pillar; 4 x M2,5 x 4 mm Flat head screw; 2 x M2 x M2 x M2 mm Hard drive copper piller. ars and Screws (to fix NVME M.2 SSD)
【Wiki】https://wiki.52pi.com/index.php?title=EP-0211
15,80 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
Freenove
Freenove Computer Case Kit for Raspberry Pi 5 (NOT Included), 128GB M.2 NVMe SSD 800 MB/s, 5 MP Camera, 0.96 Inch OLED Screen, Built-in Stereo Speakers, 3.5 mm and Optical Audio (S/PDIF)
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Computer Case Kit: Integrated with M.2 NVMe PCIe SSD slot, 5 MP camera (2592 x 1944 pixels), 0.96 inch OLED screen (128 x 64 pixel, single-color), audio system, cooling system, programmable RGB lights, exposed interface and GPIO (Note: Compatible with Raspberry Pi 5 only, NOT included)
M.2 SSD Slot (128 GB SSD included): Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5) (The write speed of SSD is much faster than that of memory card)
Boot from SSD: SSD can be used as a system disk instead of just an regular disk, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Audio System: Built-in stereo speakers with on / off switch, plus 3.5 mm and optical (S/PDIF) audio outputs
Cooling System: An active cooler for Raspberry Pi, 2 fans for the case (Automatically start and stop based on temperature)
65,95 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter Board (E) For Raspberry Pi 5, With Cooling Fan, Compatible With 2242/2230 NVMe Protocol M.2 Solid State Drive, 8Gbps Data Rate, High-Speed Reading/Writing, Pi 5 NVMe
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Compact Size PCIe to M.2 Board (E), Cooling Fan All-in-One Design, Suitable for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, Improves Working Efficiency
Matching the Size And Mounting Holes Of Pi 5, Combines A Temperature-Controlled Blower Fan With An Aluminium Heatsink to Accelerate Heat Dissipation
Based On 16PIN PCIe Interface Of Pi5. Connecting to PI5 Via 16PIN Cable
Compatible With 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Onboard Dual LED Indicators, Easy to Monitor the Working Status
21,99 € SU AMAZON
eleUniverse
eleUniverse M300 PCIe M.2 NVMe SSD Pip PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Raspberry Pi 5 PCIe to NVMe Adattatore per Raspberry Pi 5 8GB/4GB/2GB/1GB
Compatibile con la lunghezza M.2 KEY-M NVMe SSD 2230/2242 (SSD non è incluso, e non riserva di colonna per fissare 2230 SSD di lunghezza)
Modalità di alimentazione: alimenta direttamente lo scudo M300 dal nastro PCIE FFC.
Nota importante: non si consiglia di utilizzare NVMe SSD drives con un controller Phison, fare riferimento a Geekworn WiKi per maggiori dettagli!
Contenuto della confezione: 1 scheda periferica PCIe M300, 1 confezione di viti
7,00 € SU AMAZON
GeeekPi
GeeekPi N16 Quad M.2 M-Key NVMe SSD Peripheral Board for Raspberry Pi 5, Support M.2 NVMe M-key 2230/2242/2260/2280 SSDs
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Compatibility】N16 Quad M.2 M-Key NVMe SSD Peripheral Board is compatible with Raspberry Pi 5, supports the installation of 4pcs M.2 NVMe M-key 2230/2242/2260/2280 SSDs for high-speed data storage and retrieval.
【Power Delivery Support】It supports from 9V-20V PD and will automatically read the user's power supply PDO.
【Dual-Purpose Power Supply】Powers both the Raspberry Pi 5 and connected storage devices.
【Versatile Form Factor Compatibility】Accommodates M.2 SSDs in sizes 2230, 2242, 2260, and 2280. Ideal for use in Samba file systems or NAS setups, providing a robust disk expansion foundation. Comes with SSD copper pillar for 2230/2242/2260/2280 SSD installation.
【Packing List】1 x N16 PCIe to M2 NVMe Shield, 2 x PCIe FFC cable, 1 x USB-C Power Cable, 1 x Screw driver, 1x Screws Pack
【Wiki】https://wiki.52pi.com/index.php?title=EP-0180
49,99 € SU AMAZON
Coolwell
PCIe to 4-Ch NVMe M.2 Adapter Board for Raspberry Pi 5 | 4-Ch SSD Expansion | Boot Support | 7V-24V Power Input | LED Indicators
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Expand for Raspberry Pi 5 Storage with 4-Ch NVMe SSD Support – Connect up to four M.2 NVMe SSDs (2280/2260/2242/2230) via PCIe Gen2 x1 interface, enabling high-speed read/write performance for AI projects, data storage, or booting directly from SSDs.
Dual Power Options for Raspberry Pi 5 & Adapter Board – Power the Pi 5 via the 3PIN cable (5V/5A) or use the onboard 7V-24V DC jack, ensuring stable operation for power-intensive tasks like AI processing or multi-drive setups.
High-Speed Data Transfer with PCIe x1 Gen2 Interface – Achieve faster read/write speeds compared to microSD cards, ideal for applications requiring rapid file access, such as video streaming, robotics, or edge computing.
Real-Time Monitoring via Onboard LED Indicators – Track SSD activity and power status effortlessly, ensuring reliability in industrial automation, home servers, or NAS configurations.
Plug-and-Play for Raspberry Pi 5 – Connect via the 16PIN PCIe cable (included) for seamless integration, supporting bootable NVMe drives and simplifying upgrades for DIY enthusiasts and developers
34,55 € SU AMAZON
#1 VINCITORE
