Raspberry Pi 3 Ssd M2
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
17 giugno 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
19,99 € SU AMAZON
GeeekPi
GeeekPi Armor Case with CN01 M.2 M-Key PCIe 3.0 x1 Expansion Board Adapter for Raspberry Pi 5
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
CN01 M.2 M-key PCIe 3.0 x1 Espansione Board per Raspberry Pi 5: supporti M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 form factors; Provides a direct PCIe interface for high-speed data transfer; Utizes an FPC (Flexible Printed Circuit) cable for a Secure and flexible connection ection to the Raspberry Pi 5's PCIe slot
Raspberry Pi 5 Armor Case: Custom-designed for the Raspberry Pi 5; ensuring a snug fit and comprehensive protection
Soluzioni di raffreddamento avanzate: include un pad termico di alta qualità per la dissipazione del calore efficiente dall'SSD; The aluminum heatsink on the expansion board aids in maintaining optimale operating temperatures
Easy Installation: Simple plug-and-play setup with clear instructions for hassle-free installation; Designed for user-friendly assembly, even for those with limited technical expertise
Prestazioni Improvement: The ability to boot from the SSD significantly reduces startup times and enhances overall system performance
29,99 € SU AMAZON
Freenove
Freenove M.2 NVMe SSD Adapter for Raspberry Pi 5, M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 3.0, 1231MB/s
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (104MB/s max) to SSD (PCIe 2.0: 500MB/s max, PCIe 3.0: 1231MB/s max). (Note: Usually unable to reach maximum speed due to various limitations.) (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Compatible SSDs -> M.2 NVMe SSDs are compatible, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280. (Note: NOT compatible with M.2 SATA SSDs.)
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
16,86 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 NGFF SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
31,00 € SU AMAZON
KEYESTUDIO
KEYESTUDIO Raspberry Pi 5PCIE-M.2NVME SSD Shield
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it：New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Toturiali link-https://bit.ly/4eSOPE7
14,32 € SU AMAZON
ZDE
ZDE 20 pezzi Kit di Viti M.2 SSD NVMe Viti per PC Computer per Scheda Madre ASUS MSI Gigabyte NGFF Raspberry Pi
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Queste viti sono realizzate in acciaio inossidabile di alta qualità, robusto e anticorrosione, adatto per un uso duraturo.
Set di viti per schede madri Asus e Gigabyte e MSI compatibili NGFF/PCIe/NVMe/M.2 2280 SSD.
Queste viti di ricambio funzionano su quasi tutti i tipi di computer, laptop, case di computer, case di PC, ventole, alimentatori, dischi rigidi di fissaggio e aiutano a riparare o retrofittare in modo efficiente. Adatte a tutti i tipi di installazione di viti per computer.
Poiché le viti M2 sono troppo piccole, vi forniamo un cacciavite per facilitare l'installazione.
La confezione include: 10 x viti M2*2,5 mm, 10 x viti M3*3 mm, 1 x cacciavite.
6,59 € (0,33 € / unità) SU AMAZON
ssd m2 raspberry pi
raspberry pi 3 ssd
ssd raspberry pi 3
raspberry pi 5 ssd m2
ssd m2 raspberry pi 5
raspberry pi 4 ssd m2
raspberry m2 ssd
raspberry ssd m2
case raspberry pi 3 ssd
raspberry pi 3
#1 VINCITORE
