Raspberry Fan Hat
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
17 giugno 2025
Waveshare
Waveshare Poe Hat (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet Hat Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,90 € SU AMAZON
Waveshare
Waveshare Industrial Grade Metal Case (D) For Raspberry Pi 5, Larger Internal Space, Supports Installing Official Cooling Fan And Various HATs, Wall-Mount And Rail-Mount Support
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Industrial Metal Case For Raspberry Pi 5 - Rail-Mount And Wall-Mount Support, Larger Internal Space, Supports Installing Various HATs And Expansion Boards
Larger Internal Space - Specifically designed for Raspberry Pi 5, sheet metal process design, large internal capacity, compatible with Raspberry Pi 5 most module/accessories
Precise Cut-Out Design - Each Cut-Out Is Completely Aligned With The Interfaces Of Pi5, With Removable Reserved Holes. It Also Has Reserved Antenna Holes And RF Outlets To Reduce Signal Attenuation Of WiFi And BT Communication
Wall Mount & Rail-Mount Support - More Flexible For Industrial Installation And Use
Supports Installing Various HATs(Not included) - Such as PCIe TO 4G/5G M.2 USB3.2 HAT+, PCIe TO MiniPCIe GbE USB3.2 HAT+, PCIe TO Gigabit ETH USB3.2 HAT+,
15,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Case in Alluminio con Ventola e Dissipatore - Supporta POE Hat - per Modello B
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Increased Height Case】This case is higher than normal cases. It is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, and also supports POE Hat. For Case with ICE Tower Cooler kit, ASIN: B0CC1DGR99
【Easy Access to all Ports】GeeekPi Raspberry Pi 4 Case can accurately access power port, micro HDMI ports, audio port, usb ports, Gigabit Ethernet port, sd card slot.
【Good Cooling Effect】With 40mm quiet cooling fan and aluminum heatsinks provide Raspberry Pi 4 with a good cooling effect.
【High Quality Aluminum Material】GeeekPi Raspberry Pi 4 Case is made of high quality aluminum alloy; Sturdy and durable; Keep your Pi 4 Board free from dust, scratches and damage.
【Good Reception of Signals】With acrylic top panel, it won't block Wifi or Bluetooth signal.
【NOTE】This case is only for GeeekPi POE Hats ( B08MPZD47R and B08CVDQWXF ) and Raspberry Pi Official POE+ HAT.
【WiKi】wiki.52pi.com/index.php?title=ZP-0153
15,99 € SU AMAZON
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
28,99 € SU AMAZON
IBest
IBest Poe Hat for Raspberry Pi 4B 3B+,802.3af/at-Compliant,Power Over Ethernet Hat (D) Expansion Board for Raspberry Pi,with Cooling Fan And Heatsink,Tailored for Raspberry Pi Official Case
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Suitable for Raspberry Pi 3B+/4B, can be used together with the official Raspberry Pi shell, not taking up more space
Support PoE Power over Ethernet, support 802.3af PoE network standard
Fully isolated switch mode power supply (SMPS)
Onboard high speed active cooling fan, better heat dissipation
25,40 € SU AMAZON
ZDE
ZDE ZP583 PoE HAT PCIe to M.2 Key M NVMe SSD Adapter Board Power Over Ethernet with Aluminum Heatsink Onboard Cooling Fan for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 802.3af/at Network Standard
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
PoE HAT Supported: The expansion board is a Power Over Ethernet (PoE) accessory for the Raspberry Pi 5. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
802.3af/at Network Standard Supported: Suitable for use with a PoE router, switch or splitter that supports the IEEE 802.3af/at networking standard.
Great Heat Dissipation Effect: Equipped with onboard high-speed active cooler, aluminum heatsink and silicone thermal pads for better heat dissipation effect and more stable operation performance. If you don’t need to use the cooling fan, you can also disassemble it.
Compatibility: Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5 16GB/8GB/4GB/2GB computer (NOT include Raspberry Pi 5). Pin headers on the top for easy access to other Raspberry Pi expansion boards or modules.
M.2 Key-M NVMe SSD Supported: Support M.2 NVMe SSDs for fast data access and storage. Compatible with M.2 KEY-M NVMe SSD in 2230/2242 length.
33,99 € SU AMAZON
ZDE
ZDE ZP580 PoE HAT Board Compatible with Raspberry Pi 5 Power over Ethernet HAT with Onboard Cooling Fan Supports 802.3af/at Network Standard
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
La scheda PoE HAT è una scheda di espansione Power Over Ethernet (POE) 802.3af/at-compliant per il Raspberry Pi 5. Con teste impilabili Pi 40 pin GPIO standard, consente di collegare altri HAT.
Adatto per l'uso con un router o switch PoE che supporta lo standard di rete IEEE 802.3af/at. Fornire sia la connessione di rete che l'alimentazione per il vostro Raspberry Pi in un solo cavo Ethernet.
Equipped with an onboard active cooling fan for better heat dissipation effect and more stable operation performance. Se non hai bisogno di usare il ventilatore di raffreddamento, puoi anche smontarlo.
Con uscite di intestazione da 5 V e 12 V. L'intestazione da 5 V fornisce fino a 4,5 A in uscita (massimo 25 W per potenza totale in uscita 12 V + 5 V). Può alimentare dispositivi extra mentre fornisce una potenza stabile al Raspberry Pi.
Chip buck integrato: chip di tensione originale incorporato, fornisce fino a 5 A sotto una sufficiente dissipazione del calore.
24,99 € SU AMAZON
xicoolee
POE HAT For Raspberry Pi 5/CM5 Power Over Ethernet Adapter with Onboard Cooling Fan And OLED Display Supports 802.3af/at Network Standard Comes With Metal Heatsink Fits Raspberry Pi 5 Case Original
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
This PoE HAT is an 802.3af/at-compliant Power Over Ethernet accessory for Raspberry Pi 5. (Not fits PI4B and PI3B).
Onboard standard Pi 40PIN GPIO stackable header, easy connecting with other HATs.
With using this small Pi 5 HAT and some proper 802.3af/at-compliant power sourcing equipment, it is very easy to provide both network connection and power supply for your Raspberry Pi by one Ethernet cable.
Onboard cooling fan with meatal heat sink: Provides better heat dissipation
Onboard 0.87 inch OLED display, used to display information such as the Pi 5 mainboard CPU temperature and IP address.
28,80 € SU AMAZON
Waveshare
for Raspberry Pi 4 Case, DIN Rail ABS Case for Raspberry Pi 4 model B, Large Inner Space, Compatible with Raspbeery Pi Expansion Board PoE HAT (D), RS485 CAN HAT, 2-CH RS485 HAT, PI-FAN-3007
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
[DIN Rail ABS Case For Raspberry Pi 4]DIN Rail Mount Support, ABS Material, Clear Top Window, Large Inner Space
[DIN Rail Mount Support]Injection Moduling ABS Body With Rail Mount Support, Easy-To-Use
[Compatible With Various Raspberry Pi HATs]The Large Inner Space Allows Accommodating An Extra Add-On
[Customize Opening Service]Design Your Unique Case, The Opening Is Customizable For 200PCS Or More
12,49 € SU AMAZON
Miuzei
Miuzei Custodia per Raspberry Pi 5 Support SSD PCIe M.2 NVMe Hat Key-M Shield Top X1001 / X1000/ X1003/ N04 / N05 Metal Case for Raspberry Pi 5 4GB/8GB with Official Active Cooler Fan Blu
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Material: Alluminio
19,99 € SU AMAZON
fan raspberry
raspberry fan
hat raspberry
raspberry hat
raspberry pi 4 fan hat
fan hat
dac hat raspberry
raspberry dac hat
hat raspberry pi
raspberry amp hat
#1 VINCITORE
