Raspberry Can Hat
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
21 dicembre 2025
Waveshare
RS485 CAN HAT per Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Consenti Comunicazione Lunga Distanza Tramite RS485/CAN Funzione, Integrato MCP2515 CAN Controller con Chip SN65HVD230 e SP3485
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
19,52 € SU AMAZON
Waveshare
Waveshare Isolated RS485 CAN HAT B Type for Raspberry Pi 2-Ch RS485 and 1-Ch CAN Multi Protections
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN. 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485.
Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal.
Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic.
Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance.
Onboard 120Ω terminal resistor, configured by jumper. Onboard terminals and pin headers, more convenient connection. Breakout SPI control pins, for connecting with host control boards.
31,99 € SU AMAZON
Waveshare
Waveshare RS485 CAN HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Allows Stable Long Distance Communication
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, with transceiver SP3485
Reserved control pins, allows to work with other control boards
Comes with development resources and manual (examples in wiringPi/python)
19,99 € SU AMAZON
Waveshare
Waveshare 2 Channel CAN FD Expansion HAT for Raspberry Pi Supports CAN with Flexible Data Rate Multi Onboard Protection Circuits
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports both traditional CAN2.0 and CAN FD protocols
Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
Onboard lightningproof, ESD protection, short circuit protection, more safe communication Onboard voltage translator, select 3.3V/5V operating voltage by jumper
Onboard 120Ω terminal resistor, configured by jumper Comes with development resources and manual (examples for Raspberry Pi)
Onboard electrical isolation, up to 5KV isolated voltage, stable operation, higher anti-interference capability
61,99 € SU AMAZON
Waveshare
Waveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi with MCP2515 + SN65HVD230 Dual Chips Solution and Multi Onboard Protection Circuits
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
2-Channel CAN HAT For Raspberry Pi： 2-Channel Isolated CAN Bus Expansion, Multi Onboard Protection Circuits
What Can It Do?：Enable Isolated And Stable CAN Bus Capability For Your Raspberry Pi
Designed For Raspberry Pi Series：Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards
2-Channel CAN Capability：MCP2515 CAN Controller + SN65HVD230 CAN Transceiver; Electrical Isolation Circuitry Safe & Stable: SM24CANB TVS Diode, ESD Protection, Transient Peak Voltage Protection
Flexible And Handy Jumpers: Easily Select 3.3V / 5V Operating Voltage, Or Enable/Disable 120Ω Terminal Resistor, Via Onboard Jumpers
34,99 € SU AMAZON
Waveshare
Waveshare 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi Motherboards, Dual Chips Solution, Stackable Design for Expanding Multiple CAN Channels
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Standard Pi 40PIN GPIO extension header, compatible with Raspberry Pi/Jetson Nano series boards. Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
Onboard unibody power supply isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal. Onboard digital isolator, signal isolation makes the communication more safe and stable, and better anti-interference
Onboard external power supply terminal, supports 7~36V wide voltage power input, supports powering the Pi and the HAT at the same time. Onboard SM24CANB TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
Onboard voltage translator, select 3.3V/5V operating voltage by jumper. Onboard 120Ω terminal resistor, configured by jumper
Breakout SPI and I2C control pins, for connecting with other host control boards. Can provide with online development resources and manual (examples in Python/C)
36,99 € SU AMAZON
Coolwell
RS485 CAN HAT per Raspberry Pi 4B+4B 3B+3B 2B+Zero W WH Comunicare tramite RS485/CAN Onboard Controller MCP2515 Ricetrasmettitore SN65HVD230
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Il waveshare RS485/CAN HAT viene fornito con l'intestazione standard di estensione Raspberry Pi 40PIN GPIO, supporta schede serie Raspberry Pi; supporta anche arancione pi e banana pi.
Waveshare RS485 CANBUS HAT ha funzione RS485, controllato tramite UART, comunicazione half-duplex, supporta il controllo automatico TX/RX senza programmazione, ricetrasmettitore integrato SP3485
Il CAN HAT per Raspberry Pi ha TV a bordo (soppressore di tensione transitoria), sopprime efficacemente la tensione di sovratensione e la tensione di picco transitoria nel circuito per RS485 trasceiving, a prova di fulmine e anti-elettrostatico
Supporta anche altre schede con interfaccia SPI e interfaccia UART, ma i codici di esempio non sono forniti.
Sentiti libero di contattarci se hai qualche problema con l'uso, saremo sempre pronti ad aiutare a risolvere i problemi.
19,30 € SU AMAZON
IBest
2-CH CAN HAT 2-Channel Isolated CAN Bus Expansion HAT Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W,MCP2515 + SN65HVD230 Dual Chips Solution with Multi Onboard Protection Circuits
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
Integrated power isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal
Onboard digital isolator, signal isolation makes the communication more safe, more stable, and better anti-interference.Onboard TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
Onboard voltage translator, select 3.3V/5V operating voltage by jumper.Onboard 120Ω terminal resistor, configured by jumper
Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
30,29 € SU AMAZON
Waveshare
RS485 CAN HAT Allows Stable Long-distance Communication Onboard MCP2515 Transceiver SN65HVD230 SP3485 Compatible with Raspberry Pi Series
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230;Reserved control pins, allows to work with other control boards
RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightning-proof & anti-electrostatic
Comes with development resources and manual (examples in wiringPi/python),download: www.waveshare.com/wiki/RS485_CAN_HAT
19,30 € SU AMAZON
iiunius
Iiunius Cappello di espansione CAN bus isolato a 2 canali per Raspberry Pi 5/4B/3B/2B/Zero/Zero W/Zero WH/Jetson Nano 2-CH CAN HAT+ Design impilabile per espandere più canali CAN
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatibile con Raspberry Pi / Jetson Nano: connettore di espansione standard Pi 40 pin GPIO, adatto per schede Raspberry Pi serie / Jetson Nano
Isolamento dell'alimentazione: dotato di isolamento dell'alimentazione, fornisce una tensione di isolamento stabile e non richiede alimentazione aggiuntiva per i terminali di isolamento
Supporta 2 canali: dotato di un controller MCP2515CAN e di un ricetrasmettitore SN65HVD230CAN, consente la comunicazione CAN a 2 canali.
Isolamento digitale: isolamento digitale integrato, la comunicazione di isolamento del segnale è più sicura e stabile, con una forte capacità anti-interferenza.
Ponticelli integrati: dotati di diodi SM24CANB TVS (soppressore di tensione transitoria), protezione ESD e protezione di tensione di picco transitoria per una maggiore sicurezza e più satble, circuito di conversione della tensione di bordo, selezionare la tensione operativa 3,3 V/5 V tramite ponticello. Pin di controllo Breakout SPI e I2C, per il collegamento con altre schede di controllo host
35,51 € SU AMAZON
#1 VINCITORE
