Raspberry 5g
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
6 ottobre 2025
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
Waveshare
Waveshare Compatible Antenna For Raspberry Pi Compute Module 4/5, Supports 2.4G/5G WiFi Frequency Band, External Antenna for CM4/CM5/ESP32, with SMA Male Central Pin Connector
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
FREQUENCY RANGE: 2400-2500/5150-5850 MHz; RADIATION: Omnidirectional
BANDWIDTH: 100–700 MHz; CONNECTOR: SMA male central pin
VSWR: ≤1.92; POLARISATION: Vertical
PEAK GAIN: 2±0.5 dBi; Antenna DIMENSIONS: 109 × 10 mm
OUTPUT IMPEDANCE: 50 Ω; MAXIMUM POWER: 10 W
10,99 € SU AMAZON
Waveshare
Waveshare USB TO M.2 B KEY Module Driver Board for M.2 Interface 4G/5G Module(NOT Included), With Quad Antennas,USB 3.1 Port for Raspberry Pi/PC/Jetson Nano to Achieve High Speed 5G Network
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules. Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules.
USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network. 4x SMA antenna connectors, easy to install the antenna.
Onboard SIM card slot for NANO SIM card. Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions.
PCB ENIG process, reserved multi slots and positioning holes for integration. Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable.
Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use.
38,99 € SU AMAZON
Waveshare
Waveshare Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4 Compatible with Communication Modules with M.2 B Key Interface
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
Compatible With Communication Modules With M.2 B KEY Interface
Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header
Suitable For Compute Module 4 Lite/EMMC Series Module
Providing Interfaces Including: ETH/CSI/DSI/RTC/HDMI/Micro SD/USB/M.2 B KEY
76,99 € SU AMAZON
Waveshare
Waveshare RM520N-GL 5G HAT with Case,Compatible with Raspberry Pi/Windows 7/8/10/11, Quad Antennas LTE-A, Global Band, GNSS Positioning, Support 3GPP 16, 4G/3G
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Viene fornito con il modulo Quectel RM520N-GL 5G Sub-6GHz, supporta vari standard di rete come 5G/4G/3G e LTE-A, supporto di posizionamento GNSS. Viene fornito con M.2 TO 4G/5G HAT, compatibile con i moduli 5G serie RM500U-CN/RM500Q-GL/RM502Q-AE/RM520N-GL
Circuito di alimentazione ad alta efficienza, corrente di uscita fino a 3A. Viene fornito con custodia in metallo, supporta il montaggio a parete e su guida, più comodo per l'installazione
Tipologia di prodotto: COMPUTER A SCHEDA SINGOLA
Marca: Waveshare
325,99 € SU AMAZON
Waveshare
Waveshare PCIe To 5G/4G/3G HAT For Raspberry Pi 5, High-Speed, Compatible With 3042/3052 Package SIMCom/Quectel 5G Module, Compatible With Pi/OpenWRT/Windows/Linux Systems, with RM520N-GL 5G Module
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Comes with PCIe TO 5G HAT+, RM520N-GL 5G Module, 5G-4IN1-PCB Antenna
Suitable for Industrial Routers, Home Gateways, Set Top Boxes, Industrial Laptops, Consumer Laptops, Industrial PDAs, Rugged Industrial PCs, And Digital Signage...
Supports 5G/4G/3G Networking: Supports 5G NSA (4G And 5G Co-Networking) And SA (5G Separate Networking); Supports 4G/3G Internet. Connecting To PI5 Via PCIe Interface: Onboard PCIe Connector, Can Be Directly Connected To Raspberry Pi 5 PCIe Interface For 5G Networking Via 16PIN Cable
PCIe MHI Driver Porting: The Pi5 Can Load The Module Via PCIe MHI Driver. Compatible With The Latest RPi OS And OpenWRT System. Connecting To Windows/Linux Host Via USB: Onboard Type-C Port, Supports Connecting To Windows/Linux Host Via USB Cable For 5G Networking, Firmware Updating Or Debugging
5G-4IN1-PCB Antenna: Supports Top And Bottom Mounting, Easy To Install, Good Communication Effect. Onboard Power Monitoring Chip And EEPROM: For Real-Time Monitoring Voltage, Current And Power Of Module Via I2C. Supports Saving HAT+ ID And Product Information, Compatible With HAT+ Standard
314,99 € SU AMAZON
Waveshare
Waveshare Industrial Grade Metal Case (D) For Raspberry Pi 5, Larger Internal Space, Supports Installing Official Cooling Fan And Various HATs, Wall-Mount And Rail-Mount Support
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Industrial Metal Case For Raspberry Pi 5 - Rail-Mount And Wall-Mount Support, Larger Internal Space, Supports Installing Various HATs And Expansion Boards
Larger Internal Space - Specifically designed for Raspberry Pi 5, sheet metal process design, large internal capacity, compatible with Raspberry Pi 5 most module/accessories
Precise Cut-Out Design - Each Cut-Out Is Completely Aligned With The Interfaces Of Pi5, With Removable Reserved Holes. It Also Has Reserved Antenna Holes And RF Outlets To Reduce Signal Attenuation Of WiFi And BT Communication
Wall Mount & Rail-Mount Support - More Flexible For Industrial Installation And Use
Supports Installing Various HATs(Not included) - Such as PCIe TO 4G/5G M.2 USB3.2 HAT+, PCIe TO MiniPCIe GbE USB3.2 HAT+, PCIe TO Gigabit ETH USB3.2 HAT+,
15,99 € SU AMAZON
LUCKFOX
LUCKFOX PCIe to M.2 4G/5G and USB 3.2 HAT, Support SIMCom/Quectel 4G/5G Modules, High speed Internet Access, PCIe Expansion Board for Raspberry Pi 5
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Professional HAT+ Standard Board - Specially designed for Raspberry Pi 5, HAT+standard, onboard I2C EEPROM for automatic configuration and GPIO stackable expansion
M.2 Key B interface - M.2 Key B slot supports SIMCom/Quectel modules with 3042/3052 packages, tested for SIM7600X-M.2 (4G) and RM5XX (5G) series
Power and Debug Toolset - Onboard Type-C port, connecting to a PC for 4G/5G networking, debugging, firmware upgrade, or used for external power input, Onboard INA219 chip measures voltage/current/power in real time
USB 3.2 Expansion Hub and 5G-4IN1 Antenna - Extends 3x USB 3.2 Gen1 ports for peripherals like Printer, Keyboard, card reader and mouse, etc; Supports both top and bottom mounted antennas via 5G-4IN1 Antenna, reliable and stable communication
Wide Compatibility - Works with Raspberry Pi OS, Ubuntu, and OpenWRT, suitable for industrial routers, gateways, and edge computing
42,23 € SU AMAZON
Waveshare
Waveshare Modulo di espansione wireless IoT industriale, per Raspberry Pi Compute Module 4, supporta moduli wireless 4G/5G/LoRa, con interfacce multiple
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Adatto per applicazioni IoT come IoT Getaway, router wireless, acquisizione dati intelligente...
Si tratta di un modulo di espansione industriale basato su Raspberry Pi CM4, che dispone di interfacce comuni come Gigabit Ethernet, HDMI, USB e GPIO, consente di collegare ulteriori moduli di comunicazione wireless 4G / 5G / LoRa tramite la presa M.2 o Mini-PCIe.
Ci sono anche interfacce industriali/risorse tra cui RS485, CAN e RTC.
Combinato con la custodia di protezione industriale per montaggio su rotaia, il modulo è la scelta ideale per la costruzione di gateway IoT, router 4G/5G, acquisizione dati IoT o persino il dispositivo PLC nel sistema di controllo automatico industriale e altro ancora.
Presa standard CM4 e intestazione parziale Raspberry Pi GPIO. Adatto per modulo di elaborazione 4 lite/modulo serie EMMC
73,99 € SU AMAZON
ZDE
ZDE ZC506 Aluminum Case for Raspberry Pi 5 Support PCIe to 2.5G 5G Ethernet Port M.2 NVMe PoE+ HAT WIFI Shield PCIe Peripheral Board ZP591 ZP593 ZP595 ZP598 and Pi 5 Active Cooler
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatibility: The enclosure is compatible with the latest Raspberry Pi 5 2GB/4GB/8GB/16GB board, specifically designed for HAT expansion boards with Ethernet Port. For 2.5GBE Ethernet Port HAT adapter, please refer to ZP591(ASIN: B0FDGMQS95); ZP593(ASIN: B0DQ8C1PBD); ZP595(ASIN: B0DQ8BLD6L). For 5GBE Ethernet Port HAT, please refer to ZP598(ASIN: B0FQ1F1YSQ). It also supports installation of various top PCIe to M.2 NVMe SSD HAT, PoE+/PoE HAT, WiFi adapter boards.
High-quality Material: Made of lightweight and durable aluminum material, it can offer excellent protection and heat dissipation, protect the Raspberry Pi 5 board from damage, dust and scratches.
Active Cooler Supported: Support installation of official Raspberry Pi 5 active cooler and other third-party cooling fans for heatsink. For active cooler, please refer to ZP536(ASIN: B0DSZYHNF5).
Easy Access to Pi 5: This aluminum case can access all ports of Pi 5, including USB-C power jack, micro HDMI ports, USB ports, Ethernet jack, micro SD card slot, power button, GPIO port, 4-lane MIPI DSI/CSI connectors.
Practical Accessories: Only one screw is required to fix the top shell, easy and fast to install. Provide 4pcs M2.5x5+5mm spacers and 4pcs M2.5x6mm copper nuts for easy installation and fixation of the Pi 5 and expansion boards. A screwdriver is also provided.
19,99 € SU AMAZON
raspberry pi 5g
raspberry 5g hat
modulo 5g raspberry
raspberry sim module 5g
#1 VINCITORE
