Pineberry Nvme
I 7 migliori prodotti di giugno 2025
Ultimo aggiornamento:
4 giugno 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
GeeekPi
GeeekPi N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board for Raspberry Pi 5,Support M.2 Key-M NVMe SSD 2230/2242/2260/2280 (SSD and Pi5 Board are Not Included)
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】GeeekPi N07 PCIe M.2 M-key NVMe SSD Pip Peripheral Board Bottom is only compatible with Raspberry Pi 5 8GB 4GB board. Nota: Raspberry Pi 5 board is not included.
【Supporto M.2 NVMe SSD】Raspberry Pi 5 N07 M.2 NVMe SSD Adapter Board is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280.
【How to Power】Use 5 Vdc +/-5%, 5 A to power via Raspberry Pi 5 and Pi 5 will power N07 tramite pin pogo per extra power during large data transfer. and the data will transfer via FFC ribben cable with Raspberry Pi 5 via PCIe slot, consiglia di utilizzare GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
【Cooling Solution】Ventilazione hole design fornisce un'eccellente ventilazione dell'aria per il raffreddamento e supporto per Raspberry Pi 5 Active Cooler installazione.
Pacchetto incluso: 1 x N07 M.2 2280 PCIe to NVMe Bottom; 1 x cavo personalizzato PCIe FFC, 4 x M2,5 x 6 mm Copper pillar; 4 x M2,5 x 12+4 mm lungo Copper pillar; 4 x M2,5 x 4 mm Flat head screw; 2 x M2 x M2 x M2 mm Hard drive copper piller. ars and Screws (to fix NVME M.2 SSD)
【Wiki】https://wiki.52pi.com/index.php?title=EP-0211
18,99 € SU AMAZON
Geekworm
Geekworm X1003 PCIe M.2 NVMe SSD PIP PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Only use for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB with Raspberry Pi 5 official active cooler; 【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
17,00 € SU AMAZON
Geekworm
Geekworm M901 PCIe to M.2 Key-M NVMe SSD Pip PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Compatibilità: Raspberry Pi 5 PCIe HAT compatibile solo con Raspberry Pi 5 8 GB / 4 GB / 2 GB / 1 GB computer (NOT include Raspberry Pi 5), modello: M901;
【 M2 NVMe SSD supportato】Supporto M.2 KEY-M NVMe SSD 2230/2242/2260/2280.
Capacità SSD e nota di compatibilità: l'hardware M901 non ha alcun limite sulla capacità NVME SSD, che si estende sul sistema operativo Raspberry Pi. Non si consiglia di utilizzare dischi SSD NVMe dotati di un controller Phison a causa della loro incompatibilità prova, fare riferimento a Geekworn WiKi per maggiori dettagli!
Contenuto della confezione: 1 scheda periferica PCIe M901, 1 confezione di accessori (nota: non include Raspberry Pi 5, SSD, scheda TF o adattatore di alimentazione)
【Matching Case(NOT included)】Refer to Geekworm P579 (ASIN: B0CRB3DT5M), or P579 Case with Active Cooler (ASIN: B0CT4P893Q)
15,00 € SU AMAZON
Freenove
Freenove M.2 NVMe SSD Adapter for Raspberry Pi 5, M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 3.0, 1231MB/s
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (104MB/s max) to SSD (PCIe 2.0: 500MB/s max, PCIe 3.0: 1231MB/s max). (Note: Usually unable to reach maximum speed due to various limitations.) (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Compatible SSDs -> M.2 NVMe SSDs are compatible, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280. (Note: NOT compatible with M.2 SATA SSDs.)
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
17,06 € SU AMAZON
eleUniverse
eleUniverse M300 PCIe M.2 NVMe SSD Pip PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Raspberry Pi 5 PCIe to NVMe Adattatore per Raspberry Pi 5 8GB/4GB/2GB/1GB
Compatibile con la lunghezza M.2 KEY-M NVMe SSD 2230/2242 (SSD non è incluso, e non riserva di colonna per fissare 2230 SSD di lunghezza)
Modalità di alimentazione: alimenta direttamente lo scudo M300 dal nastro PCIE FFC.
Nota importante: non si consiglia di utilizzare NVMe SSD drives con un controller Phison, fare riferimento a Geekworn WiKi per maggiori dettagli!
Contenuto della confezione: 1 scheda periferica PCIe M300, 1 confezione di viti
7,00 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 128GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
25,95 € SU AMAZON
nvme
#1 VINCITORE
