Nvme Adapter Raspberry Pi 5
I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento:
30 aprile 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 with 128GB SSD, M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0 3.0, 800MB/s
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (usually read: 100MB/s, write: 10MB/s) to SSD (PCIe 2.0: read: 419MB/s, write: 253MB/s; PCIe 3.0: read: 804MB/s, write: 404MB/s. Tested with this SSD on Raspberry Pi 5). (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Comes with 128GB SSD -> M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280.
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
34,32 € SU AMAZON
GeeekPi
GeeekPi Metal Case with N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board for Raspberry Pi 5,with Raspberry Pi 5 Official Active Cooler,Support M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】This kit includes a metal case and a N04 M.2 Key-M NVMe SSD PCIe Peripheral Board,and an official active cooler, It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280. with 27W Power Supply Kit, ASIN: B0CXPBQK7F.
【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【N04 M.2 NVMe to PCIe Adapter】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
【Raspberry Pi 5 Active Cooler Included】Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
【Packing List】1x Metal Case for Raspberry Pi 5, 1x N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board, 1x Pi5 Active Cooler, 1x FPC Cable, 1x Screwdriver, 1x Screw Pack 【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD or Power Adapter.
35,99 € SU AMAZON
GeeekPi
GeeekPi N16 Quad M.2 M-Key NVMe SSD Peripheral Board for Raspberry Pi 5, Support M.2 NVMe M-key 2230/2242/2260/2280 SSDs
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】N16 Quad M.2 M-Key NVMe SSD Peripheral Board is compatible with Raspberry Pi 5, supports the installation of 4pcs M.2 NVMe M-key 2230/2242/2260/2280 SSDs for high-speed data storage and retrieval.
【Power Delivery Support】It supports from 9V-20V PD and will automatically read the user's power supply PDO.
【Dual-Purpose Power Supply】Powers both the Raspberry Pi 5 and connected storage devices.
【Versatile Form Factor Compatibility】Accommodates M.2 SSDs in sizes 2230, 2242, 2260, and 2280. Ideal for use in Samba file systems or NAS setups, providing a robust disk expansion foundation. Comes with SSD copper pillar for 2230/2242/2260/2280 SSD installation.
【Packing List】1 x N16 PCIe to M2 NVMe Shield, 2 x PCIe FFC cable, 1 x USB-C Power Cable, 1 x Screw driver, 1x Screws Pack
【Wiki】https://wiki.52pi.com/index.php?title=EP-0180
52,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case with Active Cooler Support Top PCIe M.2 NVMe Adapter X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 (P579-H500)
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
【Packing List】1 x metal case with accessories (P579), 1x Raspberry Pi 5 Official Active Cooler;
【NOTE】NOT include Raspberry Pi 5, PCIe to M.2 NVMe SSD Shield, SSD or power adapter!!!
23,00 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Mini Adapter, Compatible with Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 from Solid State Drive
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
For reference only, the Raspberry Pi 5 and cooling fan are NOT included, please refer to the Package Content for detailed part list. [Connecting To PI5 Via 16PIN Cable]: Based On 16PIN PCIe Interface Of Raspberry Pi 5
[PCIe To M.2 Mini Adapter]: Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing
[Compact Size Design]: Practical And Compact, Easily Embedded Into Your Projects
[NVMe Drive Protocol Support]: Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 And Gen3 Modes. Supports Booting PI5 From Solid State Drive
[Onboard Dual LED Indicators]: Easy To Monitor The Working Status
13,99 € SU AMAZON
GeeekPi
GeeekPi Metal Case with N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board for Raspberry Pi 5, Support M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】This kit includes a metal case and a N04 M.2 Key-M NVMe SSD PCIe Peripheral Board. It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280. with Active Cooler Kit, ASIN: B0CXP92CHG; with 27W Power Supply Kit, ASIN: B0CXPBQK7F.
【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【N04 M.2 NVMe to PCIe Adapter】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
【Packing List】1x Metal Case for Raspberry Pi 5, 1x N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board, 4x Copper Heatsinks, 1x FPC Cable, 1x Screwdriver, 1x Screw Pack
【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or Power Adapter.
25,99 € SU AMAZON
Waveshare
Waveshare PCIe To M.2 Adapter For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Connecting To PI5 Via 16PIN Cable: Based On 16PIN PCIe Interface Of Raspberry Pi 5
NVMe Drive Protocol Support:Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Onboard Dual LED Indicators: Easy To Monitor The Working Status
Onboard Power Monitoring Chip And EEPROM: Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
Reserved Airflow Vent For Cooling Fan: Better Cooling Effect For Pi5 And Solid State Drive
16,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
nvme raspberry pi 5
raspberry pi 5 nvme
raspberry pi 5 nvme base
raspberry pi 5 nvme shield
raspberry pi 5 kit nvme
raspberry pi 5 nvme hat
raspberry pi 5 nvme kit
raspberry pi 5 8gb nvme
raspberry pi 5 dual nvme
raspberry pi 5 nvme bottom
#1 VINCITORE
