Geekworm X1001 Pcie To M.2 Nvme Key-m Ssd Shield For Raspberry Pi 5
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
6 ottobre 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q;
13,88 € SU AMAZON
Geekworm
Geekworm M901 PCIe to M.2 Key-M NVMe SSD Pip PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Raspberry Pi 5 PCIe HAT only compatible with Raspberry Pi 5 16GB / 8GB / 4GB computer (NOT include Raspberry Pi 5), Model: M901;
【M2 NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.
【SSD Capacity& Compatibility Note】The M901 hardware has no limit on NVME SSD capacity, which is depend on the Raspberry Pi OS. Do not recommend to use NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility, refer to Geekworn WiKi for more details!
【Packing List】1 x M901 PCIe Peripheral Board, 1x Accessories Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case(NOT included)】Refer to Geekworm P579 (ASIN: B0CRB3DT5M), or P579 Case with Active Cooler (ASIN: B0CT4P893Q)
15,00 € SU AMAZON
ZDE
ZDE ZP518 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Dual M.2 NVMe SSDs Supported: ZP518 PCIe to Dual M.2 HAT Key-M NVMe SSD expansion board supports the installation of two M.2 Key-M NVMe SSDs in 2230/2242 length, high-speed reading/writing; supports booting pi5 from nvme solid state drive.
Compatibility: This PCIe to Dual M.2 HAT NVMe kit is only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC.
How to Power: Power the adapter directly from the PCIe FPC ribbon cable. Also, with 40pin GPIO header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
Cooling Solution: Supports the installation of official Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, better heat dissipation effect for Raspberry Pi 5 and SSD.
Practical Accessories: Comes with 2pcs M2 studs for 2230/2242 SSD installation, no soldering required. For aluminum case, please refer to ZC501(ASIN: B0DSZYLMSS).
25,99 € SU AMAZON
Geekworm
Geekworm X1011 PCIe to 4PCS M.2 Key-M NVMe SSD Peripheral Board for Raspberry Pi 5 (Not Support RAID)
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Only compatible with Raspberry Pi 5
【Support 4pcs M2 NVMe SSDs】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【Support NVMe Boot】Support NVMe boot with eeprom 2024/05/17 version and later version
【How to Power】Powering via both pogo pins & FFC or DC power jack, ensuring sufficient power supply. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV). Don't power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time!
【Packing List】1 x X1011 PCIe to M2 NVMe Shield, 2 x PCIe FFC cable (one as backup), 1x Screws Pack
【Important Notes】1. X1011 does NOT support PCIe 3.0 speed. 2. The X1011 currently does not support all RAID types
55,00 € SU AMAZON
GeeekPi
GeeekPi N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board for Raspberry Pi 5,Support M.2 Key-M NVMe SSD 2230/2242/2260/2280 (SSD and Pi5 Board are Not Included)
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】GeeekPi N07 PCIe M.2 M-key NVMe SSD Pip Peripheral Board Bottom is only compatible with Raspberry Pi 5 8GB 4GB board. Nota: Raspberry Pi 5 board is not included.
【Supporto M.2 NVMe SSD】Raspberry Pi 5 N07 M.2 NVMe SSD Adapter Board is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280.
【How to Power】Use 5 Vdc +/-5%, 5 A to power via Raspberry Pi 5 and Pi 5 will power N07 tramite pin pogo per extra power during large data transfer. and the data will transfer via FFC ribben cable with Raspberry Pi 5 via PCIe slot, consiglia di utilizzare GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
【Cooling Solution】Ventilazione hole design fornisce un'eccellente ventilazione dell'aria per il raffreddamento e supporto per Raspberry Pi 5 Active Cooler installazione.
Pacchetto incluso: 1 x N07 M.2 2280 PCIe to NVMe Bottom; 1 x cavo personalizzato PCIe FFC, 4 x M2,5 x 6 mm Copper pillar; 4 x M2,5 x 12+4 mm lungo Copper pillar; 4 x M2,5 x 4 mm Flat head screw; 2 x M2 x M2 x M2 mm Hard drive copper piller. ars and Screws (to fix NVME M.2 SSD)
【Wiki】https://wiki.52pi.com/index.php?title=EP-0211
18,99 € SU AMAZON
Geekworm
Geekworm X1003 PCIe M.2 NVMe SSD PIP PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Only use for Raspberry Pi 5 16GB / 8GB / 4GB ith Raspberry Pi 5 official active cooler; 【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
17,00 € SU AMAZON
GeeekPi
GeeekPi Metal Case for Raspberry Pi 5,Support PCIe M.2 NVMe SSD Shield Top X1001 / X1003 / X1000 / N04 / N05 & Raspberry Pi 5 Active Cooler (Not included)
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler (not included) (case with active cooler,ASIN: B0CMZG29LG)
【Robust and Portable】This Raspberry Pi 5 Metal Case is made of High-Quality iron material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
【Easy Access to all Ports of Pi 5】GeeekPi Raspberry Pi 5 Case can accurately access usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors and so on.
【Package Includes】1x Metal Case for Raspberry Pi 5; 1x Screws Pack,1x 4pcs Rubber Pads; 1x Screwdriver.
【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or Power Adapter.
12,65 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case with Active Cooler Support Top PCIe M.2 NVMe Adapter X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 (P579-H500)
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
【Packing List】1 x metal case with accessories (P579), 1x Raspberry Pi 5 Official Active Cooler;
【NOTE】NOT include Raspberry Pi 5, PCIe to M.2 NVMe SSD Shield, SSD or power adapter!!!
23,00 € SU AMAZON
geekworm x1001 pcie to m.2 nvme ssd shield per raspberry pi 5
geekworm x1001 m.2 key-m nvme ssd shield per raspberry pi 5
geekworm x1001 m.2 key-m nvme ssd shield per raspberry pi 4
raspberry pi 5 pcie m.2 nvme ssd shield bottom
geeekpi n04 m.2 m-key nvme ssd shield for raspberry pi
geeekpi n04 m.2 m-key nvme ssd shield for raspberry pi 4
pcie m.2 nvme ssd shield top x1001
pironman 5 nvme m.2 ssd pcie mini pc case for raspberry pi 5
#1 VINCITORE
