main logo

Esp32 S3 Display

I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento: 17 giugno 2025
Waveshare
Waveshare
Waveshare ESP32-S3 5 inch Capacitive Touch Display + Development Board, 1024 x 600, 178° Viewing Angle, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Support WiFi, Onboard
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • A microcontroller development board with 5inch capacitive touch display, can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  • 1024x600 resolution, 65K color. 178° Viewing Angle. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation
  • Onboard voltage regulator, supports 7~36V wide range power supply. Onboard RTC chip and rechargeable battery to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
  • Onboard LED indicators for indicating the power and battery recharging status. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 55,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 With Display, Support 3.7V Li Battery(NOT Included)
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € SU AMAZON
QIQIAZI
QIQIAZI
ESP32 S3 Display, QIQIAZI 4.3'' ESP32 Display WiFi Bluetooth Modulo, Touchscreen Resistivo TFT ESP32 S3 TN Scheda di Sviluppo,Compatibile con Arduino/LVGL
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 【Prestazioni Potenti】: ESP32-S3 sul controller ESP32-DOWDQ6, questa scheda di sviluppo offre una CPU dual-core a basso consumo con una frequenza di clock fino a 240 MHz, integrando periferiche ad alta velocità come SDIO, SPI e UART.
  • 【Schermo Touch Controllabile】: ESP32-S3 display touch resistivo TN da 4,3 pollici, la ESP32 scheda permette la personalizzazione del modulo di controllo e dell'interfaccia dell'app, rendendola ideale per lo sviluppo di applicazioni con interfacce utente personalizzate.
  • 【Supporto Multifunzione】: La ESP32 display modulo supporta interfacce multiple come UART, SPI, I2C, PWM, ADC e DAC. Inoltre, è compatibile con fotocamere OV2640 e OV7670, include una memoria flash integrata e supporta il caricamento di immagini via WiFi.
  • 【Funzionalità Avanzate】: ESP32-S3 display integra Lwip e FreeRTOS, supporta modalità di funzionamento STA/AP/STA+AP, configurazione Smart Config e AirKiss. Offre anche modalità di sospensione multiple per una gestione efficiente dell'energia.
  • 【Applicazioni Versatili】:ESP32 S3 display modulo ideale per progetti IoT come il controllo remoto di APP, la raccolta e fusione di dati ambientali, la trasmissione di immagini di dispositivi domestici intelligenti, il monitoraggio wireless, l'agricoltura intelligente, il riconoscimento di codici QR wireless e i segnali di sistema di posizionamento wireless.
  • 30,99 € SU AMAZON