main logo

Esp32 Pico

I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento: 17 giugno 2025
Waveshare
Waveshare
ESP32-C6 Microcontrollore Scheda di Sviluppo Integrato WiFi 6, Bluetooth 5 e IEEE 802.15.4 (Zigbee 3.0&Thread), Adotta ESP32-C6-MINI-1 Chip, 160MHz Processore Single-core
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • ESP32-C6 RISC-V microcontroller development board integrating WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread), compatible in size and interface with most of the Raspberry Pi Pico HATs, supports ESP-IDF, Arduino
  • ESP32-C6 WiFi 6 development board adopts ESP32-C6-MINI-1 chip with RISC-V 32-bit single-core processor, capable of running at 160 MHz, Integrated 320KB ROM, 512KB HP SRAM, 16KB LP SRAM and 4MB flash, suitable for AIoT applications
  • Onboard MP28164 high efficiency DC-DC buck-boost chip with load current up to 2A, ensuring the safety of the product
  • 20 × multi-function GPIO pins and 7 × expanded IO pins, configurable pin function, allows flexible development and integration
  • Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM, etc. to achieve various functions flexibly
  • 13,59 € SU AMAZON
Teensy
Teensy
ESP32-PICO-KIT Development Board                
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • DFRobot SKU: DFR0625
  • Wiki: https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-pico-kit.html
  • 34,90 € SU AMAZON
M5Stack
M5Stack
M5Stack Atom Lite ESP32 IoT Schede di sviluppo e kit | Kit di sviluppo C008
Spedizione gratuita
star

95

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • M5Stack Codice identificativo dell'articolo: C008
  • Basato su ESP32, RGB LED (SK6812)
  • Infrarossi incorporati
  • Perni e fori espandibili
  • Piattaforma di programmazione: Arduino, UIFlow
  • 19,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Mini Development Board, Based On ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & BT 5, Castellated Module, Suitable for SMD Applications
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE)
  • Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc
  • Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, 34 x GPIO pins allows flexibly configuring pin functions
  • 11,90 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Microcontroller Development Board,2.4 GHz Wi-Fi And Bluetooth 5 Support, Dual-Core Processor with Frequency up to 240 MHz,Supports ESP-IDF, Arduino, MicroPython
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • The ESP32-S3-Pico is a low-cost, high-performance microcontroller development board with a compact size and rich peripheral interfaces.
  • Adopts ESP32-S3R2 as the main chip, which is an MCU chip with integrated 2.4 GHz Wi-Fi and Bluetooth 5 (LE).
  • The interface chips are CH343 and CH334, so you can experience the fun of USB and UART development with a single USB-C port, and no more trouble switching interfaces.
  • The DC-DC chip adopts MP28164, a high-efficiency buck-boost chip, which adopts PWM fixed-frequency current control mode to optimize circuit stability and response speed.
  • You can choose ESP-IDF, Arduino, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.
  • 16,90 € SU AMAZON
Freenove
Freenove
Freenove Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield HAT with Pin Header, GPIO Status LED, 5 V 3.3 V
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Compatible Models: Any board (5 V or 3.3 V) with a pin spacing of 0.1 inch (2.54 mm), width 0.6, 0.7, 0.8, 0.9, 1.0 inch and length up to 2.3 inch (24 pin) (Compatible with Arduino Nano / Micro, Raspberry Pi Pico 1 / 2 (W), ESP32, ESP8266)
  • Power Supply: If using DC input (6~24 V), can provide 5 V and 3.3 V power (DC-DC circuit, up to 3A); otherwise, can use the power of the main board (Need to configure jumper caps, please refer to the tutorial)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch
  • 15,95 € SU AMAZON
Waveshare
Waveshare
Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module, Onboard RS485 / Pico HAT Interfaces, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Built in buzzer, RGB colorful LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the module
  • Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. High quality relay, contact rating: ≤10A 250VAC/30VDC. Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard USB Type-C port for power supply, firmware downloading and debugging
  • Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard digital isolation to prevent interference from external signal
  • Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Rail-mounted ABS case, easy to install, safe to use
  • Onboard 40PIN header compatible with some Raspberry Pi Pico HAT, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
  • 43,99 € SU AMAZON
Waveshare
Waveshare
Waveshare DALI2 Expansion Module for ESP32-Pico Series Boards, Supports DALI Communication for Customized Control of Multiple Lighting Groups
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Suitable for ESP32-C6-Pico / ESP32-S3-Pico development boards, supports sending DALI signals to lighting source controllers and achieving customized control of multiple lighting groups
  • Compatible with Pico interface, based on the ESP32-C6-Pico header, suitable for ESP32-C6-Pico / ESP32-S3-Pico
  • Onboard DALI communication screw terminal for connecting external DALI devices
  • Comes with examples for ESP32-S3 / ESP32-C6, enabling customized control through simple modifications
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 12,99 € SU AMAZON
Independently published
Independently published
ESP32 Bible: The Complete Guide to Embedded IoT Development
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9
TUOPUONE
TUOPUONE
TUOPUONE Modulo di espansione DAL-I2 per schede serie ESP32-Pico Supporta la comunicazione DALI per il controllo personalizzato di più gruppi di illuminazione
star

64

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Adatto per schede di sviluppo ESP32-C6-Pico / ESP32-S3-Pico, supporta l'invio di segnali DALI ai controller di sorgenti luminose e ottenere un controllo personalizzato di più gruppi di illuminazione
  • Compatibile con interfaccia Pico, basato sull'intestazione ESP32-C6-Pico, adatto per ESP32-C6-Pico / ESP32-S3-Pico
  • Terminale a vite di comunicazione DALI integrato per il collegamento di dispositivi DALI esterni
  • Viene fornito con esempi per ESP32-S3 / ESP32-C6, consentendo un controllo personalizzato attraverso semplici modifiche
  • 12,36 € SU AMAZON
esp32-pico esp32 pico d4 esp32-pico-d4 esp32-pico-v3 esp32 c6 pico esp32-pico-kit esp32-pico-devkitm-2 esp32