main logo

Esp32 Low Power

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 6 ottobre 2025
Waveshare
Waveshare
Waveshare ESP32-C6-Zero(2 PCS), ESP32-C6 Mini Development Board, Based on ESP32-C6FH4, Dual Processors, 160MHz Running Frequency, 2.4GHz WiFi 6 & BT5, ESP32 Development Board, Without Pin Header
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Without pre-soldered header. Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz
  • Built in 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM and 4MB Flash memory. Onboard USB Type-C port, 22 x GPIO pins allows flexibly configuring pin functions
  • Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance
  • Castellated module and onboard ceramic antenna, allows soldering directly to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 17,99 € SU AMAZON
Waveshare
Waveshare
Waveshare BMP390 High-Precision Barometric Pressure Sensor, Barometric Pressure/Altitude/Temperature Measuring, Low-power Consumption, for Altitude Tracking, for Raspberry Pi/Pico / ESP32
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • The BMP390 is a 24-bit absolute barometric pressure sensor, features ultra-small size, low power consumption and low noise. This digital high-performance sensor is ideal for a variety of altitude tracking applications. It can be easily integrated into projects such as GPS modules, wearables devices, audible devices and drones, suitable for applications such as accurate altimeter, environment monitoring, and IoT projects
  • Onboard BMP390 sensor for measuring barometric pressure, altitude and temperature
  • Supports I2C communication, I2C address configurable, with I2C bus cascading support
  • Supports SPI communication, enabled via CS pin (I2C bus by default). Onboard voltage translator, compatible with 3.3V/5V level
  • Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/ESP32). Please contact our 24hr customer service via the buyer/seller message to obtain relevant resources
  • 15,99 € SU AMAZON
LILYGO
LILYGO
LILYGO T-Zigbee Dual MCU Scheda di sviluppo ESP32-C3 TLSR8258 Modulo di controllo intelligente WiFi BLE IOT Ultra Low Power (kit T-Zigbee T-U2T)
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • - ESP32-C3: Rev3
  • - Dual MCU : TLSR8258 Chip a bassa potenza e chip ESP32-C3
  • -Questo prodotto ha bisogno del downloader automatico T-U2T per caricare il programma
  • -Guida alla masterizzazione: zbhci.readthedocs.io/it/latest/user-guide/burning.html
  • -Ulteriori informazioni:github.com/Xinyuan-LilyGO/T-ZigBee
  • 24,80 € SU AMAZON
TECNOIOT
TECNOIOT
TECNOIOT 2pcs ESP32 Development Board WiFi+Bluetooth Dual Cores ESP-32 ESP-32S Ultra-Low Power
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4
iiunius
iiunius
TVOC Gas Sensor Module, Total Volatile Organic Compounds Detector with High Sensitivity, Low Power Consumption, Long Lifespan & Compact Design, UART Interface for Raspberry Pi, Arduino, ESP32, Pico
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Precise Multi-Gas Detection – Accurately measure TVOC (Total Volatile Organic Compounds), CO₂ (Carbon Dioxide), and CH₂O (Formaldehyde) concentrations with high sensitivity, ensuring reliable air quality assessment for indoor and outdoor environments.
  • Seamless UART Integration – Supports UART communication for easy connectivity for Raspberry Pi, Arduino, ESP32, Pico, and other host boards, enabling rapid prototyping and smart device integration.
  • Energy-Efficient & Durable – Engineered for low power consumption and a long lifespan (up to 5 years), ideal for continuous air quality monitoring in smart homes, IoT projects, and industrial applications.
  • Compact & Versatile Design – Ultra-compact size (27×20×4.3mm) and lightweight construction allow flexible installation in air purifiers, HVAC systems, or portable environmental monitors.
  • Comprehensive Development Support – Includes detailed manuals, sample code, and tutorials for Arduino/Raspberry Pi to accelerate integration and customization for DIY enthusiasts and professionals.
  • 16,31 € SU AMAZON
LILYGO
LILYGO
LILYGO T5-4.7-S3 E-Paper Pro ESP32-S3 SX1262 LoRa 868Mhz TF Card RTC TTGO scheda di sviluppo con display E-Paper Ultra Low Power Touchable da 4,7" (con GPS)
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • T5-4.7-S3 E-Paper Pro è una versione migliorata della e-paper T5-4.7 dotata di controller host ESP32-S3.
  • T5-4.7-S3 E-Paper Pro supporta scheda TF, LoRa, RTC, funzione touch e una batteria integrata da 1500 mAh.
  • T5-4.7-S3 E-Paper Pro supporta il caricabatterie MagSafe, driver EPDIY con GPS [L76K].
  • Github: github.com/Xinyuan-LilyGO/T5S3-4.7-e-paper-P
  • Se avete domande o suggerimenti su questo prodotto, non esitate a contattarci. Risponderemo alla tua domanda al più presto possibile.
  • 89,47 € SU AMAZON
Jikoiuty
Jikoiuty
Jikoiuty Scheda di sviluppo ESP32-CAM + Kit modulo fotocamera OV2640 KB + 4 MB PSRAM 32 Mbit WiFi + Bluetooth Ultra Low Powers IoT 5V
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • 3. Supporta telecamere OV2640 e OV7670 con integrato. Supporta il caricamento WIFI immagine
  • 2. 520 KB integrato, 4 MB PSRAM esterna. Supporta UART/SP/I2C/PWM/ADC/ e altre interfacce
  • 4. Supporto scheda TF. Supporta diverse modalità di sonno. Wip e FreeRTOS incorporati. Supporta la modalità di STA/AP/STA+AP
  • 1. CPU dual-core a 32 bit a basso consumo che può essere utilizzata come processore applicativo. La frequenza principale è fino a 240 MHz e la potenza di calcolo fino a 600 MIPS
  • 5. Supporta di Smart Confing/Airkiss One Button. Supporto dello sviluppo secondario
  • 6,52 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Mini Development Board, Based On ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & BT 5, Castellated Module, Suitable for SMD Applications
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE)
  • Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc
  • Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, 34 x GPIO pins allows flexibly configuring pin functions
  • 11,80 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-C6 Mini Development Board, Based On ESP32-C6FH4, Dual Processors, 160MHz Running Frequency, 2.4GHz WiFi 6 & BT5, ESP32 Development Board, without Pin Header
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Without pre-soldered header. Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz
  • Built in 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM and 4MB Flash memory. Onboard USB Type-C port, 22 x GPIO pins allows flexibly configuring pin functions
  • Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance
  • Castellated module and onboard ceramic antenna, allows soldering directly to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 11,99 € SU AMAZON
iiunius
iiunius
3.97" e-Paper Display Module, 800×480 Color E-Ink Screen, SPI Interface, for Raspberry Pi HAT+, Compatible with Jetson Nano/Arduino/ESP32, Low Power, 4-Color E-Ink Panel
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 📺 4-Color E-Ink Display Module (800×480 Resolution): This 3.97-inch e-paper screen supports red, yellow, black, and white colors, offering excellent visibility and sharp image quality—perfect for status panels, dashboards, and shelf labeling.
  • 🔗 SPI Communication Interface for Easy Integration: Equipped with a standard SPI interface, this e-ink module is compatible with Rasp-berry Pi HAT+, Ar-duino, Jetson Nano, STM32, and ESP32—ideal for makers, engineers, and educators.
  • 🔋 Ultra-Low Power Consumption: Consumes almost no power when static content is displayed—great for off-grid projects, battery-operated signage, and long-term data displays.
  • 🧩 Rasp-berry Pi HAT+ Standard Compatible: Built with a standard 40PIN GPIO header and conforms to the HAT+ form factor, allowing seamless connection to Rasp-berry Pi and other single-board computers.
  • ⚙️Voltage Translator Onboard for 3.3V/5V MCUs: Features integrated voltage level conversion for wide MCU compatibility, supporting both 3.3V and 5V systems without additional circuitry.
  • 33,59 € SU AMAZON
low power power low esp32 power low power mcu low power pc pc low power esp32 power supply low power design power supply esp32 low power nas