main logo

Epaper Display Arduino

I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento: 13 dicembre 2025
Waveshare
Waveshare
Waveshare 1.54 Inch E-Paper Display Panel Module Kit 200 * 200 Resolution3.3v E-Ink Electronic Screen for Raspberry Pi with SPI Interface Embedded Controller
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 19,99 € SU AMAZON
xicoolee
xicoolee
1.54 Pollici E-Paper Display Tre Colori EPaper Schermo per Raspberry Pi/Arduino/Jetson Nano/STM32 200x200 Pixel Rosso Nero Bianco SPI Interfaccia E-Ink
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Display E-ink da 1,54 pollici per Raspberry Pi, 200 * 200 pixel, può visualizzare tre colori: rosso, nero e bianco
  • Schermo eink da 1,54 pollici, interfaccia SPI, utilizzo minimo del pin
  • Modulo e-paper da 1,54 pollici, traduttore di tensione integrato, compatibile con interfacce microcontrollore da 3,3 V e 5 V
  • Display a colori E, programmi di esempio open source disponibili per schede di sviluppo Raspberry Pi, Arduino, STM32 ed ESP32
  • 18,95 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
star

95

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 31,99 € SU AMAZON
IBest
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
  • Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
  • 72,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 45,99 € SU AMAZON
IBest
IBest
1.54inch E-paper Display Module 200x200 Resolution 3.3V/5V Two-Color E-ink Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh, SPI Interface
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 19,62 € SU AMAZON
IBest
IBest
2.9inch E-paper Module 296x128 Resolution 3.3V/5V Two-Color E-Ink Display Module epaper Screen SPI Interface for Raspberry Pi/Arduino/Nucleo Support Partial Refresh
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 2.9inch e-paper Module V2 Version ,SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 inch E-Paper Display Hat (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
star

68

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € SU AMAZON