main logo

Eink Display Touch

I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento: 17 giugno 2025
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 35,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 67,99 € SU AMAZON
ARCELI
ARCELI
ARCELI Display touch LCD TFT da 2,8 pollici, risoluzione 320x240, driver ILI9341, interfaccia SPI Compatibile con Arduino e Raspberry Pi
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Versatile display LCD TFT touch da 2,8 pollici compatibile con Arduino e Raspberry Pi, che fornisce immagini chiare e luminose per i vostri progetti con microcontrollore.
  • Affidabile driver ILI9341 e risoluzione 320x240 per immagini nitide e vivide, con 65K colori RGB per una visualizzazione ricca.
  • Facile integrazione tramite interfaccia SPI e tensioni operative da 3,3 V a 5 V, per un'ampia compatibilità con diversi sistemi.
  • Dotato di touch screen resistivo controllato dal controller tattile XPT2046 per una navigazione e un'interazione intuitive.
  • Bus seriale SPI, solo pochi IO possono accendere il display; con slot per schede SD per una facile espansione degli esperimenti.
  • 13,99 € SU AMAZON
IBest
IBest
2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
Spedizione gratuita
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
  • Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 107,99 € SU AMAZON
LAFVIN
LAFVIN
LAFVIN 3.5 inch TFT LCD Touch Display Shield Module 480x320 SPI Serial ILI9488 with Touch Pen Compatible with Arduino
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Schermo a colori da 3,5 pollici, supporta display a colori da 65 K, display a colori intensi.
  • Risoluzione 320 x 240, funzione touch opzionale.
  • Utilizzando il bus seriale SPI, basta solo un secondo iOS per illuminare il display.
  • Facile da espandere l'esperimento con lo slot per schede SD.
  • Fornire supporto tecnico per driver underlying.
  • 17,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
2.9 pollici E-Paper Touch Display HAT 296×128 Due Colori E-Ink Display Modulo per Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/WH Supporto 5-Point Touch Aggiornamento Parziale 3.3V/5V Interfaccia SPI
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • 2.9 inch touch e-Paper display HAT two-color E-Ink touchscreen display for Raspberry Pi, 296×128 pixels, support 5-points capacitive touch, user-defined wakeup gesture
  • Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, reversed control interface, I2C bus for touch panel, SPI bus for display, for connecting with controller boards like Arduino/STM32, etc.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, touch control power supply configuration, basically power is only required for refreshing
  • Support partial refresh, low power, wide viewing angle, paper-like effect, ideal for price tags, shelf labels, industrial instruments etc.
  • 33,69 € SU AMAZON
Coolwell
Coolwell
Coolwell 2.13inch Touch E-Paper E-Ink Display Module For Raspberry Pi Zero/Zero W, with ABS Protection Case, 5-point Touch,250×122 Pixels
star

73

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels
  • Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • 35,51 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
  • A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson serie Nano
  • Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
  • 20,99 € SU AMAZON
eink touch display eink display display touch touch display eink display hdmi eink display raspberry eink display big eink display esp32 esp32 eink display eink display wifi