E-paper Waveshare
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
16 dicembre 2025
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
67,99 € SU AMAZON
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € SU AMAZON
Waveshare
Waveshare ESP32-S3 1.54inch E-Paper AIoT Development Board, 200x200, Black/White, Supports Wi-Fi And BLE Dual-Mode Communication, without batt
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
ESP32-S3-ePaper-1.54-EN, without MX1.25 3.7V Li batt. Adopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
Built-in 512KB Static RAM, 384KB ROM, with integrated Flash and PStatic RAM. Onboard 1.54inch e-paper display, 200x200 resolution, features high contrast and wide viewing angle
Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring
Onboard TF card slot for external storage of images or files. Onboard programmable PWR and BOOT side buttons for customized function development
Reserved 2x6 2.54mm pitch pin header for convenient external expansion
23,99 € SU AMAZON
Waveshare
Waveshare V4 2.13inch E-Paper HAT+ for Raspberry Pi 5 /for Raspberry Pi Zero 2 W/for Raspberry Pi 3 B/for Raspberry Pi 4B /for Pi Pico W, 250x122, SPI, HAT+ Standard E-ink Display for pwnagotchi kit
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
2.13″ E-Paper HAT+, compared to the previous Waveshare V2, Waveshare V3 and Waveshare V4 basic versions, this latest V4 version with upgraded HAT+ Standard brings improved interoperability. Support Partial Refresh, Low Power, 170° Wide Viewing Angle, Black and White Color, Paper-Like Effect
With standard Pi 40PIN GPIO Header, compatible With Raspberry Pi Series Boards/Jetson Nano. Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws
Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications. Thin and light design, compact in Size, more space-saving
Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
No backlight required, can maintain the display content of the last screen for a long time when powered off. Can provide with online development resources and manual, such as driver board circuit diagram, examples for Raspberry Pi OS/Jetson Nano and can provide pwnagotchi porting tutorial
27,99 € SU AMAZON
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
107,99 € SU AMAZON
Waveshare
Waveshare 2.13inch E-Paper Hat+ for Raspberry Pi 5/4B/3B/Zero/Zero W/Jetson Nano,250x122 Pixels e-Ink Display Hat V4,Black And White epaper Screen,SPI Interface
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
2.13inch E-Paper HAT+ For Raspberry Pi/ Jetson Nano,Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
Onboard high-precision RTC chip for accurate time control.Optimized PCB layout with additional mounting holes for fixing screws
Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications
No backlight, keeps displaying last content for a long time even when power down
Comes with online development resources and manual,driver board circuit diagram,examples for Raspberry Pi OS / Jetson Nano, etc. and provides pwnagotchi porting tutorial
26,89 € SU AMAZON
Waveshare
Waveshare Universal e-Paper Driver Board with WiFi Bluetooth SoC ESP32 Onboard Supports Various SPI e-Paper Raw Panels
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Onboard ESP32, supports Arduino development;Easy to be integrated into wireless applications.
Provides Android APP, allows to refresh display content via Bluetooth EDR.
Provides HTML host code, allows to refresh display content via remote webpage, suit for Internet applications.
Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image Supports popular image formats: BMP, JPEG, GIF, PNG, etc.
Bluetooth protocol: 4.2, includes traditional BR/EDR, and low power BLE.
22,99 € SU AMAZON
Waveshare
Waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 latest version 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
20,99 € SU AMAZON
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
Comes with development resources and manual (examples for Raspberry Pi)
35,19 € SU AMAZON
#1 VINCITORE
