main logo

E-paper E-ink Touch Display

I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento: 17 giugno 2025
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 35,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • 7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
  • Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 107,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
  • A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson serie Nano
  • Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 3.52inch e-Paper Display (B), e-Ink Display, 360x240, Red/Black/White, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico, Support Jetson Nano/TX2/Xavier N/Orin and RDK X3
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 29,99 € SU AMAZON
IBest
IBest
1.54inch E-paper Display Module 200x200 Resolution 3.3V/5V Two-Color E-ink Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh, SPI Interface
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 19,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 latest version 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 20,99 € SU AMAZON
xicoolee
xicoolee
1.54 Pollici E-Paper Display Tre Colori EPaper Schermo per Raspberry Pi/Arduino/Jetson Nano/STM32 200x200 Pixel Rosso Nero Bianco SPI Interfaccia E-Ink
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Display E-ink da 1,54 pollici per Raspberry Pi, 200 * 200 pixel, può visualizzare tre colori: rosso, nero e bianco
  • Schermo eink da 1,54 pollici, interfaccia SPI, utilizzo minimo del pin
  • Modulo e-paper da 1,54 pollici, traduttore di tensione integrato, compatibile con interfacce microcontrollore da 3,3 V e 5 V
  • Display a colori E, programmi di esempio open source disponibili per schede di sviluppo Raspberry Pi, Arduino, STM32 ed ESP32
  • 18,95 € SU AMAZON
e-paper display touch e ink electronic paper display display e ink display e-ink e ink display e-ink display e ink e paper e ink paper e-ink paper e-paper e-ink