Current Probe Oscilloscope
I 10 migliori prodotti di luglio 2025
Ultimo aggiornamento:
27 luglio 2025
Micsig
Micsig CP2100A CP2100B Low Frequency AC/DC Current Probe CP2100 series High precision Oscilloscopes Current Probe Bandwidth DC 800KHz/2.5MHz Ranges 10A/100A Current Probe(CP2100A 800KHz)
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
◆Micsig Low Frequency AC/DC Current Probe with Auto & Manual "Zero" function
◆the current probe with Split design, small and exquisite appearance, easy to test
◆The Micsig current probe Directly powered by USB port on oscilloscope, no extra adapter needed
◆Micsig Low Frequency current probe Compatible with all BNC-connected oscilloscopes
◆Micsig CP2100A CP2100B with BNC adapters can also work with multimeters oscilloscopes
262,97 € SU AMAZON
GuliTech
GuliTech oscilloscope Probe AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800 20KHz/400Hz Bandwidth 1mV/10mA 65A/650A/800A with BNC plug(CC-65)
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
AC/DC frequency range: Up to 20 kHz
Effective Measurement Range: 20mA to 65A DC
measure current data and enable your oscilloscope to measure the current waveforms
Its current transducer is composed by permalloy and hall element
transform the AC or DC current to AC or DC current voltage
98,59 € SU AMAZON
Hantek
Hantek oscilloscope AC/DC Current Clamp probe CC-65 CC-650 CC-800 20KHz/400Hz Bandwidth 1mV/10mA 65A/650A/800A with BNC plug
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
AC/DC Current Clamp, 400Hz Bandwidth, 1mV/10mA, 650A
AC/DC frequency range: Up to 400Hz Effective Measurement Range: 20mA to 650A DC It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.
Application Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipments measurement.
157,01 € SU AMAZON
PINTECH
PINTECH Oscilloscope AC/DC Current Probe PT710-B 500KHz/50A High Frequency Clamp Current Probe Ratio 200mV/A,20mV/A
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
High frequency current clamp probe.
Easy operation,standard BNC interface, compatible with any brand's oscilloscope.
2 types of power supply,battery & adaptor power supply.
BNC cable and probe are seperate design,more durable
standard BNC connector,MT-246N banana interface included,can use with DMM or oscilloscope directly
849,00 € SU AMAZON
Micsig
Micsig Oscilloscope probe AC Current Probe ACP1000 RCP500 100/300KHz AC 1000/500A Anto Data Detection Probe(RCP500 only, ADAPTS to UPI connectors)
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
Hantek
Hantek oscilloscope Probe AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800 20KHz/400Hz Bandwidth 1mV/10mA 65A/650A/800A with BNC plug(CC-800)
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
10mV/A: 1A to 40A, DC or rms AC 1mV/A: 1A to 500A, rms AC 1A to 800A, DC
AC/DC Current Clamp, 5kHz Bandwidth, 800A
measure current data and enable your oscilloscope to measure the current waveforms
Its current transducer is composed by permalloy and hall element
transform the AC or DC current to AC or DC current voltage
195,23 € SU AMAZON
Micsig
Micsig Oscilloscope/Current/Votagle probe Micsig AC DC current probes CP2100A/B 2.5MHz 10A 100A maximum measurable current 100Apk 70.7Arms (DC+ACpk) (CP2100A)
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Micsig Tuch screen Oscilloscope Current/Votagle probe:Parameter:CP2100A /CP2100B Bandwidth:DC~800KHz(CP2100A)/ DC~2.5MHz(CP2100B) Rise time: ≤583ns(CP2100A)/ ≤175ns(CP2100B) Ranges :10A/100A(Optional on the switch) Output sensitivity :0.1V/A (10A) /0.01V/A (100A)
Micsig Tuch screen Oscilloscope Current/Votagle probe:DC accuarcy(typical) :3%±50mA (10A)/4%±50mA (100A,500mA~40Apk) /15% (100A, 40Apk~100Apk) Signal delay: <150ns (10A)/ <200ns (100A) DC signal linearity (typical) :DC signal linearity, typical on page 6
Measuring range :50mA~10Apk (10A)/1A~100Apk (100A) Maximum measurable current:100Apk, 70.7Arms (DC+ACpk)/200Apk-pk, 70.7Arms (AC) Maximum working voltage :CAT III 300V CAT II 600V Maximum float voltage :CAT III 300V CAT II 600V Maximum conductor diameter:13mm
Overload indication :The buzzer beeping, the button light flashing Power supply :DC 5V Probe head size: 11*6.1*2.5cm Control box size :10.8*5.6*2.6cm Length :228cm Weight :290g
Single package weight: 1000g Single package size :29.5*23.6*5.7cm Operating Temperature: 0°C ~50°C Storage Temperature: -20°C ~80°C
326,00 € SU AMAZON
Micsig
Micsig Oscilloscope/Current/Votagle probe CP1003/CP503/CP1003B /CP503B High Frequency AC/DC Current Probe Bandwidth: DC~50MHz / 100MHz Current Range: 6A/30A (CP1003B)
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Micsig Tuch screen Oscilloscope Current/Votagle probe:High Frequency AC / DC Current Probe Bandwidth: DC~50MHz / 100MHz Current Range: 6A/30A DC Accuracy (Typical) : ±1%±10mA（6A）; ±1%±50mA（30A）
Micsig Tuch screen Oscilloscope Current/Votagle probe:CP1003 / CP503: * Degaussing and Auto Zero sync completed * Support Manual and Automatic Zero calibration * Powered directly by Micsig UPI interface * Auto match Range with Micsig UPI-type oscilloscopes * Overload flashing light indicator
Micsig Tuch screen Oscilloscope Current/Votagle probe:CP1003B / CP503B: * Degaussing and Auto Zero sync completed * Support Manual and Automatic Zero calibration * Standard USB adapter power supply * Overload flashing light indicator
Applications:● Electric vehicle transportation design ● Switching power supply design ● Experiment of electronic engineering ● Semiconductor devices design ● Avionics design
● Inverter/Transformer design ● Electronic ballast design ● Industrial Control / Consumer Electronics design ● Engine driven design ● Power electronics and electric drive experimental design
1.159,00 € SU AMAZON
QXSJEDYCH
QXSJEDYCH oscilloscope AC/DC Current Clamp Probe CC-65 CC-650 CC-800 20KHz/400Hz Bandwidth 1mV/10mA 65A/650A/800A with BNC Plug analizzatore(CC800)
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
QDTimes
QDTimes oscilloscope AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800 20KHz/400Hz Bandwidth 1mV/10mA 65A/650A/800A with BNC plug(CC65)
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Oscilloscope AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800: AC/DC Current Clamp, 20kHz Bandwidth, 1mV/10mA, 65A
Oscilloscope AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800:AC/DC frequency range: Up to 20 kHz Effective Measurement Range: 20mA to 65A DC It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
Oscilloscope AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800:Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data.
Oscilloscope AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800:ApplicatioN: Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipments measurement.
111,81 € SU AMAZON
current probe
oscilloscope probe
dc current probe
arduino current probe
#1 VINCITORE
