Brass Bar Flat
I 10 migliori prodotti di luglio 2025
Ultimo aggiornamento:
3 luglio 2025
LANGLITZ Metalle
LANGLITZ Metalle Brass Flat Bar 30 x 5 mm x 500 mm + -5 mm
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
LANGLITZ Metalle
LANGLITZ Metalle Brass Flat Bar 8 x 3 mm x 500 mm + -5 mm
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
BABYCE
Metal Entry Door Handles Flat Barn Gate Grab Bar for Home Kitchen Bath Door, Small Rustic Door Pull Handle with Backplate(Brass,Length 60cm(23.6inch))
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Includes Complete Accessories, Easy To Install ----- You don't need to spend even one more penny to buy any more tools for its installation, since a complete accessory are offered. Just drill two holes in the door and tighten with a wrench.
Note ----- The package contains a door handle and a back panel for the interior and exterior of the door. For double doors, 2 pairs are required. (Leave us a message if your thick door requires long threaded bolts.)
Sturdy Door Handle ----- Made of thicked iron. Flat finger pull back plate.Push pull handles feature a strong resistance to rust, and deformation for an everlasting lifespan.
Round Push Pulls Handle ----- Contemporary door pull handles perfect for entrance/entry, bathroom shower, sliding, barn, french wood gate, pocket door, interior or exterior front/ main door, shops, kitchen, veranda, wine cellar, patio, shed, garage gate. Or it can be used as a handle bar for cabinets or wardrobes.
Service Guarantee ----- Please check our door handle size before purchase. If your items encounter any adaptation or anything-else problems, please give us the opportunity to replace the item/part. We provide technical support at any time, please feel free to tell us what we can do for you, we will reply in 24 hours.
102,23 € SU AMAZON
JINFEUGE
JINFEUGE Metal 300Mm L Angle Brass Stock Metal Square Flat Bar Rod H59 Art Craft Carving Decoration Art Raw Materials/1Pc/15 * 15 * 2 * 300Mm
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
L Angle Brass Stock Metal Square Flat Bar/Rod
Raw Material: Brass
Model: H59
Very Suitable For Cutting, Shaping, Finishing, Or Other Processing,Corrosion Good Mechanical Properties, And Thermal Stability.
Copper Sheets Can Be Used For Product Development, Diy, Maintenance, Production, Etc. It Can Also Be Made Into Metal, Tubes, Rods, Wires, Bands, And Plates.
69,60 € SU AMAZON
JINFEUGE
JINFEUGE Metal Plate Brass Flat Bar Solid Plate Thin Brass Sheet Metal Thickn 2Mm,Long 150Mm For Crafting/1Pc/2 * 14 * 150Mm
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Raw Material: Brass
Model: H62
Very Suitable For Cutting, Shaping, Finishing, Or Other Processing,Corrosion Good Mechanical Properties, And Thermal Stability.
Copper Sheets Can Be Used For Product Development, Diy, Maintenance, Production, Etc. It Can Also Be Made Into Metal, Tubes, Rods, Wires, Bands, And Plates.
32,20 € SU AMAZON
JINFEUGE
JINFEUGE Brass Flat Bar Brass Foil Shim Sheet Thickness 0.05Mm 0.08Mm 0.1Mm 0.2Mm 0.30Mm 0.4Mm 0.5Mm 0.6Mm 0.7Mm 0.8Mm Copper Metal Plate/1Pc/0.7 * 305 * 500Mm
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Thickness: 0.01Mm To 1Mm
Width: 300Mm/305Mm
Length: 500Mm To 3.0Meter
Very Suitable For Cutting, Shaping, Finishing, Or Other Processing,Corrosion Good Mechanical Properties, And Thermal Stability.
Copper Sheets Can Be Used For Product Development, Diy, Maintenance, Production, Etc. It Can Also Be Made Into Metal, Tubes, Rods, Wires, Bands, And Plates.
261,40 € SU AMAZON
JINFEUGE
JINFEUGE Metal Plate Brass Rectangular Solid Metal Sheet Length 120Mm H59 Brass Flat Bar Plate Strip Thick 2Mm/25 * 500Mm
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Material: H59 Brass, Which Is Widely Used, Has An Average Copper Content Of 59%.
Features: The Surface Of The Brass Flat Bar Is Smooth And Shiny. Brass Has Good Heat Resistance, Corrosion Resistance, Andhinability. Easy To Weld, Suitable For Manufactuall Kinds Of Deep-Drawing And Bending Stress Members
Application: Widely Used in Crafts, Milling, Lathes, Knives, Hobby Raw Materials And Custom Carved Plates, Maintenance, Electrical Appliances, Architectural Decoration
Very Suitable For Cutting, Shaping, Finishing, Or Other Processing,Corrosion Good Mechanical Properties, And Thermal Stability.
Copper Sheets Can Be Used For Product Development, Diy, Maintenance, Production, Etc. It Can Also Be Made Into Metal, Tubes, Rods, Wires, Bands, And Plates.
38,70 € SU AMAZON
JINFEUGE
JINFEUGE Metal Plate Solid Brass Row Strip Brass Flat Plate Bar Thick 3.0Mm 4Mm 5Mm,Length 250Mm Copper Mechanical/1Pc/4 * 10 * 250Mm
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Solid Brass Row Strip Brass Flat Plate Bar Thickness 3.0Mm 4Mm 5Mm 1Pcs Length 250Mm
Very Suitable For Cutting, Shaping, Finishing, Or Other Processing,Corrosion Good Mechanical Properties, And Thermal Stability.
Copper Sheets Can Be Used For Product Development, Diy, Maintenance, Production, Etc. It Can Also Be Made Into Metal, Tubes, Rods, Wires, Bands, And Plates.
24,00 € SU AMAZON
JINFEUGE
JINFEUGE Metal Plate H59 Brass Flat Bar Plate Strip Thick 2Mm 3.0Mm 4Mm 5Mm 6Mm 8Mm Brass Rectangular Solid Metal Sheet Length 500Mm/Thickness 6Mm/30 * 500Mm
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Material: H59 Brass, Which Is Widely Used, Has An Average Copper Content Of 59%.
Features: The Surface Of Brass Flat Bar Is Smooth And Shiny. Brass Has Good Heat Resistance, Corrosion Resistance Andhinability. Easy To Weld, Suitable For Manufactuall Kinds Of Deep-Drawing And Bending Stress Members.
Application: Widely Used in Crafts, Milling, Lathes, Knives, Jewelry, Hobby Raw Materials And Custom Carved Plates, Maintenance, Electrical Appliances, Architectural Decoration.
Very Suitable For Cutting, Shaping, Finishing, Or Other Processing,Corrosion Good Mechanical Properties, And Thermal Stability.
Copper Sheets Can Be Used For Product Development, Diy, Maintenance, Production, Etc. It Can Also Be Made Into Metal, Tubes, Rods, Wires, Bands, And Plates.
76,60 € SU AMAZON
JINFEUGE
JINFEUGE Metal Plate Brass Row Brass Square Bar Flat Bar Copper Block Diy Grounding Copper Bar Brass Plate Zero Cutting/1Pc/3.0Mm-30Mm
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Brass Row Brass Square Bar Flat Bar Copper Block Diy Grounding Copper Bar Brass Plate Zero Cutting 1Pc
Very Suitable For Cutting, Shaping, Finishing, Or Other Processing,Corrosion Good Mechanical Properties, And Thermal Stability.
Copper Sheets Can Be Used For Product Development, Diy, Maintenance, Production, Etc. It Can Also Be Made Into Metal, Tubes, Rods, Wires, Bands, And Plates.
33,00 € SU AMAZON
brass bar
flat bar
flat bar mtb
aluminum flat bar
flat bar bici
brass bar brackets
flat bar carbon
flat bar skate