Betafpv Pavo Pico Elrs
I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento:
30 aprile 2025
BETAFPV
BETAFPV Pavo Pico ELRS Brushless Whoop Quadcopter Ultra-Light 2S Cinewhoop con HD VTX staffa, F4 2-3S 20A AIO Flight Controller, 1102 14000KV Motore per DJI O3 VTX per Cruising Indoor Outdoor
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Il drone whoop brushless ultra leggero Pavo Pico con il passo più piccolo supporta DJI O3 Air Unit. Esplora più possibilità garantendo al contempo una qualità dell'immagine HD
Grazie alla staffa di montaggio HD VTX dal design diviso, Pavo Pico supporta l'installazione rapida dei moduli VTX digitali DJI O3 HD e un design antivibrante in gomma con software di stabilizzazione GyroFlow garantisce l'uscita di video ad alta definizione e immagini HD fluide
Lo slot della batteria e l'altezza del condotto della staffa di montaggio HD VTX sono stati ridotti per migliorare l'esperienza di volo complessiva. Sono supportati anche metodi di fissaggio della batteria fai-da-te, che li rendono compatibili con batterie di varie dimensioni e capacità
Il nuovo F4 2-3S 20A AIO FC V1 aggiornamenti da F4 1S 12A FC V3, pesa solo 5,92 grammi ed è ottimizzato per VTX digitale HD. La sua potenza di calcolo migliorata, l'alta velocità di risposta e il volo stabile lo rendono la scelta ideale per i whoops HD
Accoppiato con l'elica Gemfan da 45 mm ad alte prestazioni, il motore brushless 1102 14000KV e il telaio in materiale PA12, questo sistema di alimentazione raggiunge un equilibrio superbo, garantendo un sollevamento potente e un volo stabile, fornendo anche un controllo preciso e reattivo
169,99 € SU AMAZON
BETAFPV
BETAFPV F4 2-3S 20A AIO Brushless Flight Controller, for HD 2-3S HD Whoop Quadcopter like Pavo Pico/Pavo20/Pavo20 Pro/Pavo Femto
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
It features a dual 9V@2A for DJI O3 Air and 5V@3A for external device BEC
Including a new 6-pin PMU for easy installation without solder
Improving control with a 20A ESC featuring a single NMOS for continuous current capability
It offers additional UART TX3 and RX3 ports for connecting the external device
64,99 € SU AMAZON
BETAFPV
BETAFPV Pavo Pico Brushless Whoop Frame with HD VTX Bracket, 80mm Wheelbase, PA12 Material, Ultra-Light, Toughness, for HD Digital VTX like DJI O3 Air Unit, Walksnail Avatar HD Pro, Caddx Vista Kit
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Pavo Pico Frame】The Pavo Pico frame kit is a split design frame with an HD VTX mounting bracket. Die-cast screw whoop frame design increased whoop quadcopter strength and precision, enhance flight stability, and improved reliability.
【HD VTX Bracket】HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.
【Vibration Damping Design】We have incorporated the Rubber Damper design to reduce low-frequency vibrations, which is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
【More Batteries Choices】With 16mm*12.7mm battery slot size, recommend pilots use 450mAh 2S batteries. To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods at the same time. Additionally, larger batteries can be installed by using battery straps or printed components.
【Compatible HD Kits】Pavo Pico brushless whoop frame supports to install the DJI O3 directly, while Avatar and Vista require a 20*20 mounting plate and screws (included) for fixation. Install quickly and effortlessly, while meeting pilots' various DIY needs, and exploring more possibilities for flying.
14,99 € SU AMAZON
BETAFPV
BETAFPV Pavo Femto Brushless Whoop Drone Frame with HD VTX Bracket Camera Canopy for O4 Air Unit, Modular Design, 75mm Wheelbase, PA12 Material, Effortless Install, for DIY Cinewhoop Drone Quadcopter
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Pavo Femto Frame Kit: The Pavo Femto brushless whoop frame is designed for performance and durability, offering a 4% thrust increase in a compact structure. It features improved connections between the whoop duct and carbon fiber plate with added supports and limits for secure assembly. Optimized for the DJI O4 Air Unit, it includes a reinforced protective structure for the circuit board
4% Thrust Boost: Inspired by rocket engine nozzle design, the Pavo Femto Frame optimizes whoop duct aerodynamics with precise height and thickness adjustments. Despite its smaller size, the frame achieves an approximate 4% thrust increase, providing enhanced power and stability. This allows pilots to execute advanced maneuvers like flips and turns with precision, ensuring smooth and reliable performance even in challenging conditions
Enhanced Structural Design: Features an optimized connection between the whoop duct and the carbon fiber plate with added supports for a secure fit, ensuring quick and hassle-free assembly. Say goodbye to loose nuts and tedious installations
Modular Design Legacy: Maintains the modular design while upgrading the HD VTX Bracket compatible for O4 Air Unit with a reinforced protective structure for its circuit board, enhancing durability and reliability during use
HD VTX Bracket Compatible for O4 Air Unit: The HD VTX bracket includes the camera bracket and shock-absorbing components for O4 Air Unit, ensuring stable performance for high-quality footage. Its mounting holes are fully compatible with Pavo Femto, Pavo Pico, and Pavo20, making it ideal for various builds
19,99 € SU AMAZON
BETAFPV
BETAFPV Pavo20 Pro Brushless Whoop Quadcopter 2.2inch Cinewhoop with HD Digital Bracket, LAVA 1104 7200KV Motor GF2218 3-B Prop Compatible for DJI O3/Caddx Vista/Runcam Link for FPV Freestyle Shooting
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
As a 2.2'' cinewhoop drone quadcopter under 150g, the pocket-size Pavo20 Pro is an ideal choice for DJI pilots to enter FPV. Supports various types of HD digital VTX systems like DJI O3 Air unit/Caddx Vista/Runcam Link etc.Exclusively sculpted for FPV freestyle shooting
Continuing the frame structure of Pavo20, we improved the whoop duct, combined LAVA1104 7200KV motor, and 2.2'' lower pitch Gemfan 2218 3-blade propeller propulsion system, this equipment offers unparalleled max thrust for freestyle. It achieves a thrust-to-weight ratio greater than 5:1, delivering a faster and more agile freestyle
Integrated injection molding HD VTX mounting bracket, has a split design that makes it effortless to install for pilots DIY, and explores more possibilities while ensuring HD image quality. The camera side panel and 6-point fixation hole design precisely safeguard the lens, guaranteeing uncompromised lens protection, including 2 new cam fixed holes for the wide-angle mode shooting, minimizing the cam side panel shadows for the wide-angle view
Pavo20 Pro with a 93.7mm wheelbase frame is constructed with a crash-proof PA12 thickened whoop duct, its reinforced cross-section design enhances the strength and blast resistance, ensuring durability in demanding flight conditions. It also accommodated COB LED strips seamlessly which can be securely mounted on the frame whoop duct, adding unique lighting effects and a visually captivating appearance.
Equipped with F4 2-3S 20A AIO flight controller integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices. It includes a DJI O3 6-pin PMU allowing for connection to HD VTX without soldering. Its improved computing power, high response speed, and stable flight make it an ideal choice for Freestyle
139,99 € SU AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G OpenTX Mini Nano Ricevitore Prestazioni a Lungo Raggio ad Alta Frequenza di Aggiornamento per Drone da Corsa FPV
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【ExpressLRS 】ExpressLRS è un link RC aperto a source per applicazioni RC, basato su Semtech Lora SX127x o SX1280 hardware per RX e TX Recectively. Questo rende ExpressLRS uno dei più rapidi RC disponibili a sinistra e offre prestazioni di lunga .
【Il ricevitore ExpressLRS】BETAFPV Nano Receiver è basato sul projececect ExpressLRS, un link a source RC per applicazioni RC che consentono di ottenere le migliori prestazioni di collegamento possibili in entrambe le velocità, latenza e gamma per moduli ELRS TX o Nano Bay, ecc.
【Crossfire Serial Protocol】ExpressLRS utilizza il protocollo seriale Crossfire (protocollo AKA CRSF ) per comunicare tra il ricevitore e la scheda di controllo del volo. In questo modo la scheda di controllo del volante supporta il protocollo seriale CRSF. Come impostare il protocollo CRSF può essere visto sul manuale (lingua italiana non ).
【Nano Size】questo ricevitore ha solo 0,7 grammi e il volume è di 12 mm x 19 mm, molto adatto per bambini perché sono ultra leggeri e nano.
【Configuration & Bind】 Nano receiver could enter binding status by power on/off three times. Step: Plugin and unplug nano receiver three times; Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode; Make sure the RF TX module or radio transmitter enter binding status, which sends out a binding pulse; If the receiver has a solid light, it's bound.
22,99 € SU AMAZON
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual Receiver Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【TXCO Tech】SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
【Dual RF Receiver Chains】SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
【Two Dipole T Antennas】SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
【Compatible Products】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks
【Ultralight Weight】 Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
28,99 € SU AMAZON
BETAFPV
BETAFPV Pavo20 Pro Brushless Whoop Frame Kit with HD Digital VTX Bracket, PA12 Thickened Duct, Effortless Install, for DIY Cinewhoop Drone Quad like Pavo20 Pro with HD Digital Camera
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Constructed with a crash-proof PA12 thickened whoop duct. Its reinforced cross-section design enhances the strength and blast resistance
Employing the principles of aerodynamics, the frame boosts an extra 8~11% thrust compared with without the whoop duct, coupled with LAVA Series 1104 Brushless Motors, enabling Pavo20 Pro up to 6'40'' flight time
Add 2 new cam fixed holes for the wide-angle mode shooting. The cam side panel protects the lens from effective harm, eliminating any concerns about angle deviation after intense flights while allowing for easy vertical installation of ND filters. Featured the Pavo Series' Classic Rubber Damper Design, delivers a consistently smooth, HD image
Integrated injection molding HD VTX mounting bracket eliminates the hassle of adjusting screw tightness, and hassle-free installation with only 8 screws. The antenna holder is tailored to the contours of the antenna's form and installation, ensuring easy assembly and secure retention
An open-ended battery strap slot including side-limitation slots ensures secure and stable battery placement that accommodates a wide range of batteries
19,99 € SU AMAZON
BETAFPV
BETAFPV Meteor75 Pro 1S Brushless Drone with Matrix 1S 5IN1 FC, 1102 22000KV Motor, 45mm 3-Blade Prop for FPV Freestyle Racing Indoor Outdoor, Fly Time Up to 6.5Min with BT2.0 550mAh 1S Lipo - ELRS
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Ultra-Powerful: Meteor75 Pro 1S brushless whoop quadcopter is the largest available 1S whoop on the current market. It can offer pilots a faster, more responsive flight experience, and longer flight time, which would be ideal for FPV racing or acrobatic flying indoors or outdoors
Matrix 5IN1 FC: The upgraded Matrix 1S Brushless Flight Controller brings exceptional durability and performance to the Meteor75 Pro. It features a G473 processor, boosting computing speed by 55%, along with an integrated 5.8GHz 400 VTX for seamless integration. Its robust 1mm-thick board adds durability, and the built-in motor plugs simplify installation, making it ideal for beginners while ensuring excellent performance for FPV racing and freestyle
Frame&Propellers: Meteor75 Pro brushless whoop frame is built for the largest 1S brushless drone quadcopter. Featuring motor holders for convenient installation, and it is perfect for 45mm propellers. This combo performs very precisely, agile, and fantastic flying. It greatly enhances the thrust for 1S whoop
Motors&Battery: Meteor75 Pro features updated powerful 22000KV 1102 motors and BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter
Camera&Canopy: Built-in 1.45g ultralight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones. Adopted with an injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone
142,99 € SU AMAZON
BETAFPV
BETAFPV ExpressLRS 2.4G Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Performance】Ultralight ELRS Lite receiver has a 2.4GHz Flat SMD ceramic antenna. A solid flat antenna without irregular parts can withstand crashes, making the receiver not so fragile. Perform well in control, range and stability, bringing a good flight experience to pilots
【Weight&Size】New lite receiver with a flat antenna features a 3mm extra-thin board and 0.53g lightweight, which requires less assembly space on drones with limited space
【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance
【ExpressLRS Lite Receiver】BETAFPV ELRS Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications that aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module, etc
【Configuration & Bind】The Lite receiver comes with officially major release V1.1.0 protocol and no Binding Phrase included. Lite receiver could enter binding status by power on/off three times
16,99 € SU AMAZON
betafpv pavo pico
pavo pico
betafpv pavo
#1 VINCITORE
