main logo

4g/lte Base Hat For Raspberry Pi

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 6 ottobre 2025
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 77,99 € SU AMAZON
Waveshare
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • ✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
  • ✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
  • ✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
  • ✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
  • ✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
  • 50,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi Jetson Nano Based on SIM7600G-H Supports LTE CAT4 up to 150Mbps for Downlink Data Transfer The Global Version Positioning Module
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on. Onboard CP2102 USB to UART converter, for serial debugging. Onboard audio jack and audio decoder for making telephone call. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
  • Breakout UART control pins, to connect with host boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. TF card slot for storing data like files, messages, etc. 2x LED indicators, easy to monitor the working status.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • 96,99 € SU AMAZON
Kalttoy
Kalttoy
Migliora la connettività del tuo dispositivo con 3G 4G LTE Base HAT per Raspberry
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Scatena tutto il potenziale del tuo dispositivo con questo avanzato cappello base 3G e 4G, che fornisce accesso a Internet senza interruzioni e possibilità di espansione.
  • Grazie alla compatibilità per un'ampia gamma di moduli e schede Mini PCIe, questo Base HAT offre versatilità e flessibilità per vari progetti.
  • Progettato per appassionati e hobbisti, questo Base HAT consente agli utenti di creare applicazioni innovative, stabilire connessioni remote e accedere a Internet ad alta velocità.
  • Che tu stia costruendo un sistema di automazione domestica, impostando il monitoraggio remoto o lavorando su progetti elettronici, questo Base HAT fornisce Internet affidabile e veloce, rendendolo uno strumento essenziale.
  • Sperimenta la comodità di controllare separatamente il LED e la ventola, garantendo un raffreddamento ottimale ed evitando disagi durante l'uso notturno. Porta i tuoi progetti al livello successivo con questo cappello base ricco di funzionalità!
  • 28,39 € SU AMAZON
sb components
sb components
PiTalk 4G HAT IoT abilitato 4G HAT per Raspberry Pi Comunicazione e GNSS Posizionamento Quectel EG25-G Global Band 4G LTE/WCDMA/GSM/GPRS HAT, Supporta Dial-up, Telefonata, SMS, TCP, ecc.
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • PiTalk 4G è una soluzione di connettività cellulare basata sul modulo Quectel EG25-G LTE Cat 4, che supporta velocità dati fino a 150 Mbps downlink e uplink a 50 Mbps per applicazioni M2M e IoT.
  • Il dispositivo è compatibile con le bande globali e supporta 3G e 4G LTE con fallback 2G, comprese le bande 4G LTE-FDD e 4G LTE-TDD.
  • Il supporto GNSS integra la tecnologia di localizzazione Qualcomm IZat Gen8C Lite, inclusi GPS, GLONASS, BeiDou/Compass, Galileo e QZSS e 1x connettore U.FL.
  • PiTalk 4G dispone di un supporto per schede NanoSIM, jack audio da 3,5 mm, connettore per altoparlanti a 2 pin, 1 connettore SMA e 1 connettore U.FL per connettività cellulare e supporto audio.
  • Con un tasto di accensione e LED di rete, stato e alimentazione, PiTalk 4G consente di effettuare e ricevere chiamate, inviare/ricevere messaggi SMS e accedere a dati ad alta velocità tramite Raspberry Pi o altro dispositivo host con basso consumo energetico.
  • 158,00 € SU AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible With Raspberry Pi Series Boards/Jetson Nano
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € SU AMAZON
Waveshare
Waveshare
4G/3G/2G/GSM/GPRS/GNSS Hat Based SIM7600E-H for Raspberry Pi/Jetson Nano Support LTE CAT4 for Downlink Data Transfer/4G High-Speed Connection/Telephone Call/Sending SMS
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc; Supports GPS, BeiDou, Glonass, LBS base station positioning; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Onboard CP2102 USB to UART converter, for serial debugging; Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Onboard audio jack and audio decoder for making telephone call;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper;Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), development resources: www.waveshare.com/wiki/SIM7600E_4G_HAT
  • 82,55 € SU AMAZON
fasient1
fasient1
3G / 4G e LTE Base HAT to USB Riser Card con presa per scheda NANO SIM per Raspberry 4/3/2 / B + / per PC Laptop
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Totalmente compatibile con i modelli 4/3/2 / B + con header GPIO a 40 pin
  • La presa mini PCI E a clip è compatibile con LTE mondiale, per copertura UMTS / HSPA + e GSM / GPRS / con moduli regionali o globali che funzionano con frequenze e operatori diversi
  • Per la presa della scheda NANO SIM può essere facilmente raggiungibile dal lato superiore del CAPPELLO
  • Può essere utilizzato in modalità standalone con PC / laptop tramite USB senza impilare con per
  • Il circuito di alimentazione a corrente di quiescenza efficiente e basso può supportare fino a 3 Amp
  • 22,44 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H M.2 4G Hat for Raspberry Pi LTE CAT4 High Speed Global Coverage Multi Band 4G/3G/2G Communication and GNSS Positioning
Spedizione gratuita
star

73

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • ✅Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
  • ✅USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Aduino
  • ✅Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • ✅Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
  • ✅Onboard audio jack and audio decoder, allows audio operation like making phone call. High efficiency power supply circuit, up to 3A output current
  • ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
  • 107,99 € SU AMAZON
Coolwell
Coolwell
SIM7600G-H 4G HAT (B) For Raspberry Pi Series Board, Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning, Global Band
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Connected via pogo pin or MicroUSB connector: Dedicated pogo pin for Raspberry Pi Zero/Zero W; MicroUSB connector for other Raspberry Pi boards or PC
  • Incorporates SIM7600G-H global band 4G module, compatible with 2G/3G/4G network with global support; USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access
  • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.; Supports GPS, BeiDou, Glonass, LBS base station positioning; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • SIM card slot, supports 1.8V/3V SIM card; Onboard audio jack and audio decoder for making telephone call; 2x LED indicators, easy to monitor the operating status;Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Comes with development resources and manual (examples for Raspberry Pi): http://www.waveshare.com/wiki/SIM7600G-H_4G_HAT_(B)
  • 96,50 € SU AMAZON
4g gsm hat for raspberry pi raspberry pi 4g lte raspberry pi 4g hat