main logo

32 Bit

I 10 migliori prodotti di luglio 2025
Ultimo aggiornamento: 26 luglio 2025
Ieron
Ieron
Ieron Scheda di Controllo GRBL per Macchina per Incisione CNC 300W 500W 4 Assi 32 Bit Controller mandrino
38% Sconto Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • La nostra macchina per incisione CNC vanta un controller mandrino a 4 assi a 32 bit con un potente processore ARM a 32 bit.
  • Progettata pensando alla flessibilità, la nostra scheda di controllo GRBL supporta varie tensioni di ingresso che vanno da 12-24 V CC, rendendola compatibile con un'ampia gamma di macchine per incisione CNC. Presenta inoltre il supporto del segnale di modulazione TTL/PWM e molteplici opzioni di interfaccia, tra cui interfacce 3P e 2P+2P, supporta motore 775, mandrino 200 W/300 W/500 W; supporta azionamento a quattro assi X/Y/Z/A, azionamento doppio asse Y.
  • Con il supporto per motori passo-passo fino a 2A di corrente massima (1,5A consigliati), la nostra scheda di controllo offre un controllo motore eccezionale. È compatibile con i modelli di motori passo-passo più diffusi, come Nema17 e Nema23 (massimo 57 motori passo-passo), garantendo la compatibilità con una varietà di configurazioni di macchine.
  • La scheda di controllo GRBL è compatibile con i programmi software più diffusi, come LaserGRBL, Lightburn, Candle (3 assi) e Universal Gcode Sender. Driver esterno con interfaccia riservata e driver ad alta potenza sul mercato, cablaggio pratico e coerente.
  • Funzionalità di sicurezza integrate: per garantire la sicurezza degli utenti principianti e non professionisti, la nostra scheda di controllo è dotata di programmi di protezione integrati che impediscono la modifica del firmware. Prima dell'acquisto, si prega di esaminare le funzionalità e le specifiche della scheda per assicurarsi che soddisfino i requisiti specifici.
  • 34,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 With Display, Support 3.7V Li Battery(NOT Included)
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € SU AMAZON