main logo

2.9 Eink

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 12 ottobre 2025
Waveshare
Waveshare
Waveshare Tri-Color 2.9inch E-Ink Display Module Resolution 296x128 3.3v E-Paper Electronic Screen Panel Three-Color SPI Interface for Raspberry Pi/STM32/Arduino/Jetson Nano
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download link: www.waveshare.com/wiki/2.9inch_e-Paper_Module_(B)
  • 28,79 € SU AMAZON
Waveshare
Waveshare
Waveshare 2,9 pollici E-Paper Raw Display Panel 296 x 128 Resolution 3,3 V E-Ink Electronic Paper Screen Without PCB with Embedded Controller Support Partial Refresh,Communicating Via SPI interfaccia
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Si tratta di un display grezzo E-Ink da 2,9”, risoluzione 296 x 128, con controller integrato, comunicazione tramite interfaccia SPI, supporta la rifreschezza parziale.
  • A causa dei vantaggi di un consumo energetico ultra basso, ampio angolo di visione, grande effetto sotto la luce del sole, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali, e così via.
  • Nessuna retroilluminazione, mantiene la visualizzazione dell'ultimo contenuto per un lungo periodo di tempo anche quando è spento.
  • Basso consumo energetico, la potenza di base è necessaria solo per rinfrescarsi.
  • Viene fornito con risorse di sviluppo e manuale (schema di scheda driver, esempi per Raspberry Pi/Arduino/STM32).
  • 19,99 € SU AMAZON
IBest
IBest
2.9inch E-paper Module 296x128 Resolution 3.3V/5V Two-Color E-Ink Display Module epaper Screen SPI Interface for Raspberry Pi/Arduino/Nucleo Support Partial Refresh
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • 2.9inch e-paper Module V2 Version ,SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
IBest
IBest
2.9inch Passive NFC-Powered e-Paper Black/White e-Ink Display, No Battery Required, Wireless Powering and Data Transfer,Refreshed By Smartphone
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 2.9" NFC-Powered E-Paper.Adopts Novel Passive NFC Technology,No Battery Required, No More Battery Life Trouble
  • Wireless NFC-Powered Display Refreshing.Passive NFC Solution, No Battery Required, No Messy Wiring, Stable Operation
  • No backlight required, e-Paper keep displaying the last content for a long time without power
  • No power adapter required.Compe with ABS case
  • You can modify the display content by smartphone.App is provided
  • 37,95 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 "Tocco E-Paper E-Ink Display HAT Per Raspberry Pi 5 punti Touch capacitivo 296 × 128 pixel in bianco e nero Supporto Aggiornamento parziale Interfaccia SPI
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Modulo ePaper capacitivo da 2,9 pollici, risoluzione 296 × 128. Supporto touch a 5 punti, gesto di sveglia definito dall'utente.
  • Nessuna retroilluminazione, continua a visualizzare l'ultimo contenuto per un lungo periodo di tempo anche quando si spegne.
  • Consumo energetico ultra basso, praticamente l'alimentazione è necessaria solo per rinfrescare.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi.
  • Interfaccia di controllo invertita, per il collegamento con schede controller come STM32, ecc. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi).
  • 36,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) 296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Note:New Version please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 29,99 € SU AMAZON
Waveshare
Waveshare
296x128 Resolution 2.9 Inch E-Paper Display Panel Module 3.3v E-ink Electronic Screen SPI interface with Embedded Controller Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
Spedizione gratuita
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download resources: www.waveshare.com/wiki/2.9inch_e-Paper_Module
  • 22,00 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) 296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 27,99 € SU AMAZON
Waveshare
Waveshare
2.9inch E-Ink Display Module Resolution 296x128 E-Paper Electronic Screen Panel Three-Color SPI Interface with ESP8266 WiFi Driver Board for Raspberry Pi/STM32/Arduino/Jetson Nano
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Come with e-Paper ESP8266 Driver Board (WiFi) allows to display image from PC/smart phone via WiFi conveniently
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo/Jetson Nano, etc.
  • Download link: www.waveshare.com/wiki/2.9inch_e-Paper_Module_(B)；www.waveshare.com/wiki/e-Paper_ESP8266_Driver_Board
  • 26,90 € SU AMAZON